Run Faster, Lift stronger, Think deeper

REP fitness PR-1050 rack vs Rogue Monster Collegiate rack

Written by Pascal Landshoeft | Jun 5, 2021 4:00:00 PM

REP fitness PR-1050 rack vs Rogue Monster Collegiate rack

This is a comparison between the Rep Fitness PR-1050 rack and the Rogue MOnster Collegiate rack. Follow the links for more details.

Overview and review of the Rogue Monster Collegiate Half Racks

 

Price: 1.160

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster collegiate racks are a good solution when you want to build along lane of racks with plates in the middle. See the details in this article.

What else to consider from Rogue

Most popular Rogue racks in 2020

Attached you find which Rogue racks have been most popular on Marathon-Crossfit.com in terms of views of their reviews and click through rates to Rogue Fitness for purchases. If you want to learn more about the details of the composition of the data you can read the full analyses under what were the most popular Rogue products in 2020.

 

 
The most popular rogue racks based on views of their reviews on Marathon-CrossFit in 2020 are:
 
 
The Rogue HR2 rack is part of the Rogue Monster lite series. What it has going for itself is its moderate place and lower space requirements compared to other racks of Rogue. I can also see how this rack can be a best seller as it is practical, not pricey and ticks most boxes. You can learn more about the details and alternatives in the review of the HR2 rack.
 
The Rogue RM8 is one of the most expensive items you can get from Rogue. The RM8 incorporates all of the major developments from Rogue like cerakote coating, a Rhino drop-in unit, and the LT1 50 cal lever arms. Its high price helps with popularity but I do not think that it is a high volume sales product based on its sheer size and high price tag. You can read a full review of the RM8 on this blog.
 
The RML 390 F is a half-rack from Rogue that does not need to be bolted to the ground. This makes it a very likely candidate from Rogue to have a very high sales volume. The small footprint and reasonable price further underpin this. Compared to the RM8 it is affordable so popularity is more likely to directly transfer to sales. You can read the full review of the RML 390F on my blog here.
 
The RM4 Fortis is a cheaper version of the RM4 Monster rack from Rogue. You will have fewer color options and get fewer pins and extras with your order. This is a good option if you want more space in the rack than with a half rack without shelling out thousands of dollars. You can ted the fu review of the RM4 fortis rack here.
 
The RML 390c is a half-rack from Rogue with a color option. Compared to the 390F it needs to be bolted to the ground to avoid sliding while it comes in at a similar price. You can read the full review of the 390c on my blog by following this link.

Overview of the Rogue collegiate rack

The Monster Collegiate half rack is another special purpose rack and one of the newer developments in the Rogue portfolio. You get the full benefit of the design when you opt for the double rack option. This leaves the plate storage in the middle of two training stations optimizing footprint and rack stations in a long line which can be accessed from both ends. In addition, the design makes it easy to switch between band/rope work and heavy lifts in the same session due to the prolonged sockets. 
 

How many clients should the collegiate rack bring you?

 
If you think that the Rogue Monster Collegiate will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.160$. Adjust the numbers for your own gym accordingly.
 

Pros of the collegiate rack

 

The Rogue Monster Collegiate is a low price option to enter the Rogue Monster Series family of Rogue. If you want to train many people in parallel this is a good option. 
 

Cons of the collegiate rack

There are not many cons to this low price monster rack except that you do not get a full rack to train in.
 

Alternatives to the collegiate rack

Here are some alternatives at a price point of 1.160$ to the Collegiate rack:
 
With this rack, you get a nice full rack with special branding at a slightöly lower price than the collegiate rack. This can be a good option when you want more space inside the rack to do your workouts. 
 
 
This is an option that leaves you with a full rack and the option to choose your color. The disadvantage is that you get the Monster LIte to make instead of the Monster base for your rack.
 

Conclusion

If you want a rack that is not too expensive and can be used inside and outside a rack for band work, this is the one to go for. It is also a good option when you have limited space and want o make maximum use of your setup.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 
 

Overview of the REP PR-1050 Rack $269

 
 
The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:
 
  • 72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
  • 26" depth inside to inside, 44" wide inside to inside
  • 2x2" steel
  • Plastic lined j-cups to protect bar knurl
  • 2" hole spacing throughout working area
  • 1.25" and 2" Pull up bars
  • Numbered uprights every 5th hole
  • Extra bar holders on the front of safeties, great for pressing outside the rack
  • 2 Weight horns on rear base for storage and added stability
  • 700lb weight capacity
  • 400lb pull up bar capacity
  • 400lb dip attachment capacity (dip attachment available as an optional upgrade)
 
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
 

Pros of the REP PR-1050 Rack

 
The pros of the REP PR-1050 are:
 
  • All in one design
  • Price
  • Short design
 
If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
 

Cons of the REP PR-1050 Rack

 
The cons of the REP PR-1050 are:
 
  • 700lbs capacity limit
  • Limited upgrade options
  • Not ideal for the west side method
  • Imported
 
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.
 

Alternatives to the REP PR-1050 Rack

 
The alternatives to the REP PR-1050 rack are:
 
 
The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
 
The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
 
The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
 

Conclusion for the REP PR-1050 Rack

 
If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.
 
 
View full post