Information on how to run faster, lift stronger and think deeper

REP fitness PR-1100 rack vs TITAN X3 squat stand

Posted by Pascal Landshoeft

Jun 9, 2021 9:00:00 AM

REP fitness PR-1100 rack vs TITAN X3 squat stand

This is a comparison between the Rep Fitness PR-1100 rack and the TITAN X3 squat stand. Follow the links for more details.

Click for Instagram

Overview and review of the X-3 Squat stand with pull up bar 

The TITAN X3 Squat stand will put you back about $490. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500

Related articles

Overview of the X3 squat stand 

 
The X3 is a squat stand which boasts 3x3 steel tubes. It is, therefore, a very sturdy squat stand compared to other 2x3 or 2x2 options. The X3 comes with Westside spacing in the lower part of the rack to allow for smaller increments on the bench press. The flat foot design saves you bolting it to the floor which makes it a very good option in some home gym scenarios. It also comes with spotter arms. The specifics and features of the squat stand are: 
 
 
  • 3" x 3" 11 gauge steel uprights
  • Westside hole pattern through bench zone
  • 2" hole spacing above and below.
  • 1,000 + lb capacity
  • Pair of UHMW lined X-3 JHooks included
  • Double-sided gusset plates 
  • Standard 1.25" Pull up bar included 
  • Mounted at your preferred height. 
  •  Pair of X-3 Spotter Arms included
  • Height: 92"
  • Width: 49"
  • Depth: 48" 
  • Product Weight: 203  lb
  • Finish: Black Power Coating
  • Floor Space: 16.3 sq ft (49" x 48")
 
This is as sturdy as they come as far as squat stands go. 
 

Pros of the X3 squat stand

 
As with all TITAN equipment, the first thing to note is the competitive price. You will have a challenge to find a good quality 3x3 squat stand for the same price. A squat stand also gives you the ability to drop weight easier than in a power rack. If you prefer the Olympic lifts over powerlifting this might be the better choice for you. A squat stand also saves space and can be easily transported. 
 

Cons of the X3 squat stand 

 
Especially for beginners, you have less protection. The spotter arms are fine and nice, but in practice, safety pins in a full rack are a lot more secure as you won’t miss them. The whole structure is also led likely to tip over if installed correctly. In addition, TITAN is known for inconsistencies on their finish. 
 

Alternatives to the X3 squat stand 

 
These are other options for the X3 squat stand
 
 
For almost the same amount of money, you can get a colored version of the T3 rack. While the tubes are only 2x3 you will get a full rack in the color of your choice. 
 
Another way to go is to save on the color to have more budget for different size options on the T3 and maybe even adding some plate holders. The T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.
 
The T3 folding rack saves you about $100 on the X3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar. 
 

Summary of the X3 squat stand 

 
A great option for anyone planning on a home gym for Olympic lifting or a gym that still has a corner left and does not j ow what to do with it. If you get the squat stand make sure you can store your plates somewhere separate. 
 

Overview and review of the REP fitness PR-1100 rack

This is an overview of the REP fitness PR-1100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 

Overview of the REP PR 1100 Rack $269

 
The REP PR-1100 gives you a choice of color for your low budget rack and a multi grip pull up bar. Unfortunately it strips the 1000er series of the plate storage at the back which makes it my least favorite rack out of the 1000er line. Some of the specifications are:
 
  • Height Adjustable Multi-Grip Pullup Arch
  • Laser Engraved Numbered Uprights
  • Plastic-Lined J-cups
  • Extended Safeties
 
A solid rack if you want a multi-grip bar and a rack for $300. Otherwise I personally would go for the PR-1000.
 

Pros of the REP PR 1100 Rack

 
The pros of the REP PR-1100 are:
 
  • Choice of color
  • Multi Grip bar
 
The main distinguishing parts to the other 1000er racks are the choice of color and the multi grip bar. If that is what you want, go for the 1100. Otherwise i think that the PR-1000 is the better package because of the plate storage at the back.
 

Cons of the REP PR 1100 Rack

 
Cons of the REP PR-1100 are:
 
  • No included plate storage
  • 700lbs capacity
  • Imported
 
The PR-1100 has no included plate storage in the base configuration, which in my opinion makes it inferior to the 1000 and 1050 for the low budget market it is addressing.
 
With 700 lbs capacity this is not a rack for big guys who move a lot of weight regularly on awkward bar paths. If you are a seasoned strength athlete this rack is too small and flimsy and you are better off with the PR-4000 or PR-5000.
 
The last con is that this rack is imported from China. If you don’t care, you don’t, but if local production is important to you then REP fitness needs to be ruled out and you need to go with Rogue Fitness or Sorinex.
 

Alternatives to the REP PR 1100 Rack

 
 
I personally think that the PR-1000 is the better option for the same price as you will need plate storage more than a multi-grip pull up bar. That is just based on my personal experiences where flooring and storage is usually being underrated when building a home gym.
 
The Rogue HR2 is a solid option for a half rack from Rogue under $1000. If you want a locally produced US alternative to the REP 1000er series which is beefier than the HR2 is a great choice.
 
The TITAN T2 Series is one of the lowest cost racks Form the lowest cost vendor in the market. If you want to go as cheap as possible for your rack TITAN is a good address. TITAN comes with a higher risk of quality issues than the other vendors mentioned in this article.
 

Conclusion for the REP PR 1100 Rack

 
The REP 1100 rack is great if you are looking for a rack with a multi-grip bar out of the box. Otherwise, I think the other 1000 racks are a better choice for your hard-earned cash.

Topics: Powerlifting, Rack, Garagegym, Home Gym, Bodybuilding, REP Fitness