REP fitness PR-4100 rack vs TITAN X3 squat stand

This is a comparison between the Rep Fitness PR-4100 rack and the TITAN X3 squat stand. Follow the links for more details.

Overview and review of the X-3 Squat stand with pull up bar

The TITAN X3 Squat stand will put you back about $490. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500

Overview of the X3 squat stand

The X3 is a squat stand which boasts 3x3 steel tubes. It is, therefore, a very sturdy squat stand compared to other 2x3 or 2x2 options. The X3 comes with Westside spacing in the lower part of the rack to allow for smaller increments on the bench press. The flat foot design saves you bolting it to the floor which makes it a very good option in some home gym scenarios. It also comes with spotter arms. The specifics and features of the squat stand are:

3" x 3" 11 gauge steel uprights
Westside hole pattern through bench zone
2" hole spacing above and below.
1,000 + lb capacity
Pair of UHMW lined X-3 JHooks included
Double-sided gusset plates
Standard 1.25" Pull up bar included
Mounted at your preferred height.
Pair of X-3 Spotter Arms included
Height: 92"
Width: 49"
Depth: 48"
Product Weight: 203 lb
Finish: Black Power Coating
Floor Space: 16.3 sq ft (49" x 48")

This is as sturdy as they come as far as squat stands go.

Pros of the X3 squat stand

As with all TITAN equipment, the first thing to note is the competitive price. You will have a challenge to find a good quality 3x3 squat stand for the same price. A squat stand also gives you the ability to drop weight easier than in a power rack. If you prefer the Olympic lifts over powerlifting this might be the better choice for you. A squat stand also saves space and can be easily transported.

Cons of the X3 squat stand

Especially for beginners, you have less protection. The spotter arms are fine and nice, but in practice, safety pins in a full rack are a lot more secure as you won’t miss them. The whole structure is also led likely to tip over if installed correctly. In addition, TITAN is known for inconsistencies on their finish.

Alternatives to the X3 squat stand

These are other options for the X3 squat stand:

For almost the same amount of money, you can get a colored version of the T3 rack. While the tubes are only 2x3 you will get a full rack in the color of your choice.

Another way to go is to save on the color to have more budget for different size options on the T3 and maybe even adding some plate holders. The T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.

The T3 folding rack saves you about $100 on the X3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.

Summary of the X3 squat stand

A great option for anyone planning on a home gym for Olympic lifting or a gym that still has a corner left and does not j ow what to do with it. If you get the squat stand make sure you can store your plates somewhere separate.

Overview and review of the REP fitness PR-4100 rack

This is an overview of the REP fitness PR-4100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-4100 Rack $429

The REP PR-4100 is the folding version of the PR-4000 rack that outbid the REP fitness rack product line. With this rack, you get two uprights, and the cross-members you need to build a rack that can be bolted to the wall with a folding mechanism. This is the ideal rack for a garage gym in which you still want to park or a floor space that should be transformed into a yoga or playroom after the use of the rack. Some of the specifications for this rack are:

Choose between 21.5" or 41" depth (from wall to the front outside of upright).
(1) pair of plastic-lined J-cups.
(1) easy-to-adjust 1.25" pull-up bar.
5/8" diameter hardware.
1" hole spacing in benching area.
2" hole spacing above and below bench area.
Uprights: 11-gauge steel, 3x3", 92" tall.
21.5" Dims: 18.5" inside length x 42.5" inside width.
41" Dims: 38" inside length x 42.5" inside width.
48.5" overall width.

This is a solid option to get a lower-cost folding rack of good quality. Especially with folding racks it nightmare sense to invest a few extra dollars as the folding action needs more attentional detail in production than a simple four post rack.

Pros of the REP PR-4100 Rack

Pros of the REP PR-4100 are:

Space efficient
Budget efficient
Reliable brand

The biggest plus of folding racks is that they can get out of the way when they are not needed anymore. If you only have one occasional user of the rack in the house O would seriously consider a folding rack.

The PR-4100 is good on your purse from two perspectives. You are getting your rack from a company that imports their products from China and you are buying a product that uses less metal than a PR-4000 or PR-5000. This makes the PR 4100 a smart buy. Especially if you are not planning on many upgrades and attachments.

Compared to Amazon resellers or TITAN fitness you will buy from a young brand that is still bending over backward to grow its customer base. You will get good, reliable service with this rack in most cases, that is why the price is a little higher than sourcing from Amazon or from TITAN.

Cons of the REP PR-4100 Rack

The cons of the REP PR-4100 are:

Limited use of attachments
Imported
Plate storage

As this is a folding rack with smaller holes on 3x3 uprights your use of attachments will be very limited. Personally, I think the most you can really get out of a folding rack is a dip station and not much else, but that is just me.

If you buy from REP Fitness your rack will be produced and packaged in China and then send to a warehouse in the US. If that rubs your patriotic streak up the wrong way you have to buy from Rogue Fitness instead and pay the extra money American Labour costs.

My biggest con for a folding rack is that you still have to come up with some solution for storing your plates as you can not do it on the rack. Unless you keep it permanently in place which defeats the purpose. There are good wall storage solutions for plates but those involve more DIY.

Alternatives to the REP PR-4100 Rack

Alternatives to the REP PR-4100 are:

The Rogue RML3WC is what comes closest out of the Rogue fitness portfolio to you the PR-4100. It has the same uprights with only slightly different drillings for the holes. Some say that the folding action on the RML3WC is a little smoother but that also hugely depends on where it is being installed and who did the job.

The TITAN X3 folding rack is TITAN’s 3x3 upright folding rack. This is the best option for a low price while still having some proper customer support with it. Other options are Amazon resellers who just stuck produce to flip it for a small

margin in bulk.

The REP SR 4000 is an alternative option if you believe in squat stands with a big base for stabilizing. I personally don’t but if you think that is a good idea the SR 4000 is excellent value for money.

Conclusion for the REP PR-4100 Rack

I personally think folding racks are a great idea for home gyms that need to co promise. If you use your garage as a mechanic/workshop in parallel or own a fancy Sunday car, this is the right option for you.