REP fitness SR-4000 squat stand vs TITAN X3 squat stand

This is a comparison between the Rep Fitness SR-4000 rack and the TITAN X3 squat stand. Follow the links for more details.

Overview and review of the X-3 Squat stand with pull up bar

The TITAN X3 Squat stand will put you back about $490. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the X3 squat stand

The X3 is a squat stand which boasts 3x3 steel tubes. It is, therefore, a very sturdy squat stand compared to other 2x3 or 2x2 options. The X3 comes with Westside spacing in the lower part of the rack to allow for smaller increments on the bench press. The flat foot design saves you bolting it to the floor which makes it a very good option in some home gym scenarios. It also comes with spotter arms. The specifics and features of the squat stand are:

3" x 3" 11 gauge steel uprights
Westside hole pattern through bench zone
2" hole spacing above and below.
1,000 + lb capacity
Pair of UHMW lined X-3 JHooks included
Double-sided gusset plates
Standard 1.25" Pull up bar included
Mounted at your preferred height.
Pair of X-3 Spotter Arms included
Height: 92"
Width: 49"
Depth: 48"
Product Weight: 203 lb
Finish: Black Power Coating
Floor Space: 16.3 sq ft (49" x 48")

This is as sturdy as they come as far as squat stands go.

Pros of the X3 squat stand

As with all TITAN equipment, the first thing to note is the competitive price. You will have a challenge to find a good quality 3x3 squat stand for the same price. A squat stand also gives you the ability to drop weight easier than in a power rack. If you prefer the Olympic lifts over powerlifting this might be the better choice for you. A squat stand also saves space and can be easily transported.

Cons of the X3 squat stand

Especially for beginners, you have less protection. The spotter arms are fine and nice, but in practice, safety pins in a full rack are a lot more secure as you won’t miss them. The whole structure is also led likely to tip over if installed correctly. In addition, TITAN is known for inconsistencies on their finish.

Alternatives to the X3 squat stand

These are other options for the X3 squat stand:

For almost the same amount of money, you can get a colored version of the T3 rack. While the tubes are only 2x3 you will get a full rack in the color of your choice.

Another way to go is to save on the color to have more budget for different size options on the T3 and maybe even adding some plate holders. The T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.

The T3 folding rack saves you about $100 on the X3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.

Summary of the X3 squat stand

A great option for anyone planning on a home gym for Olympic lifting or a gym that still has a corner left and does not j ow what to do with it. If you get the squat stand make sure you can store your plates somewhere separate.

Overview and review of the REP fitness SR-4000 squat stand

This is an overview of the REP fitness SR-4000 squat stand including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP SR-4000 Squat stand $449

The REP SR-4000 is REP Fitness’s flagship squat stand. It comes in two height variations and with a stable base similar to a combo rack. Here are some of the specifications from the vendor:

Two height options to suit your needs ( 96" &103").
Sturdy 3x3” 11ga steel.
Compatibility with most REP 4000 series attachments.
1” spacing throughout the bench press area.
Base-mounted weight horns for weight storage and added stability.
Long base with pre-drilled feet for optional floor-mounting.
103” height option is great for taller athletes who want to perform kipping movements.
Includes Standard PR-4000 J-cups and 1.25” pull-up bar.
5/8” holes on the uprights, 5/8” holes at the rear of the base, 1” holes on the sides of the base.
Not compatible with: The REP Belt Squat, Lat/Low Row Attachment.
Base dimensions: 73" x 53"
Weight: 96": 230lbs, 103": 237lbs
Weight Capacity: This is based on the j-cup capacity which is <1500lbs.

If you are really into squat stands for the freedom they provide and the money they save then this is good for you. I am personally not a fan, but I will get into the details.

Pros of the REP SR-4000 Squat stand

The pros of the REP SR-4000 squat stand are:

Massive built
Sturdy uprights
Compatibility with some attachments

For a squat stand, the REP SR-4000 is massive. This means a lot of security and stability for anyone who is working in it. If you are concerned about the security with a squat stand, this is a good choice.

The uprights are sturdy and beefy compared to cheap squat stands and even allow for some of the light PR-4000 attachments to be used. This makes it a more versatile option compared to cheap Amazon squat stands.

Cons of the REP SR-4000 Squat stand

Cons of the REP SR-4000 squat stand are:

Footprint
Safety
Storage
Price

The biggest con for me is the footprint of this squat stand and other ones of a similar design. If you put two uprights on the footprint of a four-post rack you might as well get a four-post rack. This is nothing against the SR 4000 per se but the design of these particular squat stands with a big base provides more security. You can also get these from other vendors like Rogue and TITAN.

While this lulls you in a false sense of security whilst saving you the cost of a four-post rack with similar steel, I think in reality it’s suboptimal. If you are in need of added security as a beginner, spotter arms and a squat stand are a good way to get injured. Many set up their spotter arms wrong, miss them when they fail a rep and the base of this squat stand can actually get in the way when you want to bail a squat. If you don’t know what you are doing, get a proper power rack. If you exactly know what you are doing, this squat stand is overkill.

Compared to other, cheaper squat stands without a base, this squat stand can not be easily stored and transported. It is also quite costly if you look at it from a squat stand perspective as you can also get a decent rack for this price.

Alternatives to the REP PR-4000 Squat stand

REP PR-4100
Rogue SML 2C
TITAN X3 Squat stand

The REP PR-4100 is in the same price range as the squat stand. If you are torn between the two, definitely go for the PR-4100. It saves space, is more secure to squat in, and provides a better base for attachments, even though you need to remove them to fold the rack.

Rogue SML 2 is the closest in build-out of the Rogue portfolio to the SR 4000. If you wanted a very similar squat stand at a higher price thatching not imported thistles a good choice. Also, keep in mind which ecosystem you are entering as Rogue has been around for longer and therefore offers a few more options in their portfolio.

The TITAN X3 squat stand is the closest you can get to the SR-4000 in the TITAN Portfolio. If you want to get this show on the road with the lowest budget possible TITAN is a good bet.

Conclusion for the REP SR-4000 Squat stand

The SR-4000 is well built for its design. There are little to no production issues with it. That is if you buy into the concept of a squat stand with a big base which I just simply don’t. You either need the safety that a power rack provides or you don’t. If you are super advanced like Clarence Kennedy, you might as well get a squat stand that is two separate uprights for easy transportation, storage, and saving cost. Be aware that this necessitates that you are either super strong and won’t fail or know exactly what you are doing when you bail a lift. Spotter arms are in my opinion useless. This is the only piece of safety equipment I ever managed to break with rack pulls. You can get a decent rack for 400 dollars or very basic squat stands for a little more than a hundred. Get one of the two, but not a squat stand that eats up 400 bucks and considerable floor space.