Rogue Westside Power bar vs camber bar
This is a comparison of the Rogue Westside bar and the camber bar including pros, cons, and alternatives. Follow the links for more details
Overview and review of the Rogue Camber bar
This overview of the
Price 295$
Related articles
- Which belt to buy from Rogue
- Which barbell to buy from Rogue
- Which rack to buy from Rogue over $1000
- Which rack to buy from Rogue for under $1000
- Which plates to buy from Rogue
- Which strength equipment to buy from Rogue
- Which conditioning equipment to buy from Rogue
- Which Equipment package to buy from Rogue
- Which accessory to get from Rogue
- Which jump rope to get from Rogue
- Which bench to get from Rogue
- Which dumbbell to get from Rogue
- Which knee sleeve to get from Rogue
Overview of the Rogue Camber bar
The camber bar is another variation of the specialty bars of Rogue. It is very similar to the safety bar with a few differences. The first is that the hands can be placed lower on the frame. This helps even more with athletes suffering from a shoulder injury. The other difference is that the weight swings more during the movement. This helps with bigger core activation. While the safety bar lets you squat more weight deeper the camber bar actively works on balance.
The camber bar comes in at a weight of 85lb. The shafts fit regular clips and plates. The camber bar comes fully welded. Pay special attention to quality when you buy specialty bars. The production process is usually less mechanized than for barbells. You need a good welding job to be safe. Yes, you can get these bars a lot cheaper from craigslist. However, you might end up with a terrible welding job.
Pros of the Camber bar
The camber bar is unusual and will challenge your athletes. Not a lot of people have ever seen, nevermind used a camber bar in the real world. Combining the camber bar and safety bar is especially useful for strongmen who have to get used to moving weights at different angles and positions. If you want to use this as a cheaper replacement for a Yoke carry be cautious You can not put this bar down in the middle of the walk.
Cons of the Camber bar
This bar already weighs 85lb unloaded. It is also very cumbersome and awkward to store. This is a tool for big gyms with lots of floor space. If you are already constrained for space this is not the bar to get. It is also more challenging than the safety bar. If you are a beginner deciding between a safety and camber bar, go for the safety bar.
Conclusion
The rogue camber bar is a good tool especially for strongman training.Alternatives can be the Rogue safety bar or a Rhino hip belt squat to take tension off the shoulders and wrists.
Review and Overview of the Rogue Westside Power bar
This overview of the Westside bar was originally published in my comprehensive guide on which Rogue barbell to buy. If you are currently considering to buy a Rogue barbell it is worth a read to get input on the latest models. I update the guide on a yearly basis depending on Rogue's new releases.
Price 345$
Overview of the westside power bar
The Westside bar has been developed together with Louie Simmons which is not too far from his own gym. The Westside barbell training facility is world famous for continuously producing some of the strongest powerlifters in the US and on an international level. The Westside method is a staple for strength coaches. The method is especially well tailored to lifters who compete with bench press shirts and squat and deadlifting suits.
The westside barbell weighs in at 45lb with a diameter of 29mm. It can withstand 205K PSI tensile strength and connects the sleeves to the shaft via bushing. Rogue offers a black zinc finish on shaft and coating. The knurling is powerlifting and the bar has no whip. The loadable sleeve length is 16.25. There is no 20kg version available.
The westside barbell was part of one of the earliest pushes of Rogue to diversify their portfolio away from their Ohio bar and Bella bar. So far, the westside bar has not gotten a Cerakote facelift. This might be planned in the near future. The westside barbell is a good alternative to the Ohio power bar or Thor power bar. Keep in mind that this is a powerlifting speciality bar. If you are mainly focused on weightlifting have a look at the Pyrros bar & training bar. If you own a CrossFit gym stock up on all-purpose barbells like the Ohio and Bella bar first before you branch in special bars like westside bar.
Westside bar pros
When you are looking for a very stiff bar with a less aggressive knurl this is the bar to go for. You get 205K of tensile strength with standard knurling. The fact that Louie Simmons gave it his approval also points in the direction that this is the right bar for powerlifters who vary their grip often. This is a crucial component of the westside method. There are a few reviews out there which prefer the West Side barbell to the Ohio power bar, even though it comes in at a higher price.
Westside bar cons
The black zinc finish is more open to corrosion than other finishes from Rogue. It is also a powerlifting specific bar and you might also have to buy an Ohio deadlift bar to complete the set. Depending on your need the Matt Chan bar retails at just a slightly higher price, has the same tensile strength and has a better whip. It all depends on your goals. If you want to do more than powerlifting this bar is not ideal. If your main focus is the big three go for this one.
Conclusion
The westside bar is a great option when you are mainly focused on powerlifting and want to do the three big lifts. It is a bit more upmarket than the Ohio power bar and less expensive than the Rogue Ohio deadlift bar.
