Rogue Westside Power bar vs training bar

This is a comparison of the Rogue Westside bar and the training bar including pros, cons, and alternatives. Follow the links for more details

Overview and review of the Rogue Training bar

The Rogue Ohio training bar combines the Rogue Oly and Ohio bar to create a low price training bar for Olympic weightlifting with great whip at an affordable price. This article was originally published in "Which Rogue barbell to buy".

Price 295$

Overview

The rogue training bar takes the core of the higher priced Oly bars and combines it with the sleeves and bushings of the Ohio bar. The result is the lowest priced bar with a great whip in the Rogue selection. This is the bar to get for gyms tailored to the needs of beginner Olympic weightlifters. You still get the feel of the whip while optimizing for cost as they likely are going to wreck the bars quicker.

The training bar weighs 20kg and comes with bushing at a 190K PSI tensile strength. The loadable sleeve length is 16.25 and the diameter of the bar is 28mm. The shaft is made of black zinc while the sleeves come in bright zinc. A standard knurl round this bar into a good package for aspiring Olympic lifters.

The training bar is a good cost safer coming in at 200$ less than the high-end Olympic barbells. This is almost two for one for your Olympic weightlifting needs. I would not equip a gym full of Olympians with this, but when you run a reputable gym that is aimed at making soccer moms and middle-aged dads strong, this is the bar to go for.

Pros of the training bar

The biggest pro is the price. You can not beat 295$ in the rogue selection to get a great whip. Even if you are mainly getting all-purpose barbells you can throw in one or two of these to keep your Oly fans happy.

Cons of the training bar

The training bar has no bearing and only comes in Zinc. Therefore your athletes will train with bars that do not fully represent what happens in competition. This can have an impact on movements like the snatch and clean and jerk which hugely depend on timing and explosiveness. The zinc is one of Rogues poorer coatings in terms of corrosion. Be prepared that you have to replace these bars more often if your gym goes for a very neat and tidy look.

Learn more about the specs of the Rogue Training bar and purchase on the Rogue website

Review and Overview of the Rogue Westside Power bar

This overview of the Westside bar was originally published in my comprehensive guide on which Rogue barbell to buy. If you are currently considering to buy a Rogue barbell it is worth a read to get input on the latest models. I update the guide on a yearly basis depending on Rogue's new releases.

Price 345$

Overview of the westside power bar

The Westside bar has been developed together with Louie Simmons which is not too far from his own gym. The Westside barbell training facility is world famous for continuously producing some of the strongest powerlifters in the US and on an international level. The Westside method is a staple for strength coaches. The method is especially well tailored to lifters who compete with bench press shirts and squat and deadlifting suits.

The westside barbell weighs in at 45lb with a diameter of 29mm. It can withstand 205K PSI tensile strength and connects the sleeves to the shaft via bushing. Rogue offers a black zinc finish on shaft and coating. The knurling is powerlifting and the bar has no whip. The loadable sleeve length is 16.25. There is no 20kg version available.

The westside barbell was part of one of the earliest pushes of Rogue to diversify their portfolio away from their Ohio bar and Bella bar. So far, the westside bar has not gotten a Cerakote facelift. This might be planned in the near future. The westside barbell is a good alternative to the Ohio power bar or Thor power bar. Keep in mind that this is a powerlifting speciality bar. If you are mainly focused on weightlifting have a look at the Pyrros bar & training bar. If you own a CrossFit gym stock up on all-purpose barbells like the Ohio and Bella bar first before you branch in special bars like westside bar.

Westside bar pros

When you are looking for a very stiff bar with a less aggressive knurl this is the bar to go for. You get 205K of tensile strength with standard knurling. The fact that Louie Simmons gave it his approval also points in the direction that this is the right bar for powerlifters who vary their grip often. This is a crucial component of the westside method. There are a few reviews out there which prefer the West Side barbell to the Ohio power bar, even though it comes in at a higher price.

Westside bar cons

The black zinc finish is more open to corrosion than other finishes from Rogue. It is also a powerlifting specific bar and you might also have to buy an Ohio deadlift bar to complete the set. Depending on your need the Matt Chan bar retails at just a slightly higher price, has the same tensile strength and has a better whip. It all depends on your goals. If you want to do more than powerlifting this bar is not ideal. If your main focus is the big three go for this one.

Conclusion

The westside bar is a great option when you are mainly focused on powerlifting and want to do the three big lifts. It is a bit more upmarket than the Ohio power bar and less expensive than the Rogue Ohio deadlift bar.

Learn more about the specs of the Rogue Westside power barbell and purchase on the Rogue website