Run Faster, Lift stronger, Think deeper

Slater stone mold vs Rogue cube sandbag

Written by Pascal Landshoeft | Sep 17, 2020 4:00:00 PM

Slater stone mold vs Rogue cube sandbag

This is a comparison between the Hybrid stone mold and the rogue cube sandbag including pros, cons, and alternatives. It was published first under which rogue sandbag to get. Follow the links for more details.

Overview and review of the Rogue cube sandbag

This is an overview of the Rogue cube sandbag including pros, cons, and alternatives. It was published first under which rogue sandbag to get. Follow the links for more details.

Related articles

 

 

 

 

Overview of the rogue cube sandbag

Price: $85 - $127.50
 
The rogue cube sandbag is one of the multiple sandbag variations for strongman training from Rogue. This sandbag enters at the lower price range and is available from 100lb to 200lb when filled with play sand. The cube shape is slightly more challenging as the original cylinder shape because of the corners. While they are good to hold on to, they can make it harder to balance the weight once you have lifted it. The full specifications of the Rogue strongman cube sandbag are:
 
  • Made in the USA
  • Patent Pending Design
  • Sold Individually
  • 1000D MIL Spec US Cordura construction
  • New CUBE Shape
  • Filler Capacity (3 Sizes): 100LB, 150LB, 200LB
  • Built-In Filler Bag
  • Zipper and Hook-and-Loop Closure
  • Filler Material Not Included
  • Color: Black with White Rogue logo on the flap
  • Recommended use on rubber or nonabrasive surface - not intended for slams
This is a good bag to get together with a cylinder bag to get started and still have a little variety for your lifts.
 

Pros of the Rogue cube sandbag

 
Pros of the Rogue cube sandbag are:
 
  • Portable
  • Symmetrical load
  • Robust design
The Rogue cube sandbag is made of military-grade fabric just like the entire rogue strongman sandbag line up. As you can fill these bags with sand or other media and empty them they are also easier to transport than a bunch of medicine or slam balls, nevermind atlas stones. As this bag forms a cube the load is symmetrical and therefore easier to lift than the other, asymmetrical bags from Rogue. All in all the cube strongman bag is a great starter in Strongman training, especially when paired with a cylinder bag. 
 

Cons of the Rogue cube sandbag

 
Cons of the Rogue cube bag:
 
  • Limited weight range
  • Not for slams
  • Slightly harder to handle than a cylinder
The rogue cube sandbag comes with a limited weight range compared to the original cylinder bag. This is not the end of the world as you can play around with lead shot and play sand mixture, but still, big cube bags are currently not available from rogue. They are also not designed for high-velocity slams, which might make the structure of the bag suffer, especially if filled to the brim with crumb rubber and smashed at full velocity. That is not what these bags have been built for and a ball might be the better choice for this intent. 
 

Alternatives to the Rogue cube sandbag

 
Alternatives to the Rogue cube sandbag are:
 
The original rogue strongman sandbag has a cylinder form and is available from weight denominations of 100lb to 400lb. You can also pick some color variations. If you are getting your first bag this might be the better choice than the cube as the cube is slightly harder to handle. 
 
The MK D ball is Rogue's slam ball option on steroids. These slam balls scale up to 150lb at roughly the same size. As the filler gets more expensive to keep the same dimensions, the biggest D balls come in at a hefty price. Still, if you want to slam heavy, these are the best option. Especially in the mid-range from 30lb to 100lb. 
 
The Rogue medicine balls are a valid alternative to the sandbags if you want to throw the balls against a wall or from person to person. The sandbags are not ideal for this purpose.
 

Conclusion for the Rogue cube sandbag 

 
The Rogue cube sandbag is a good option for ambitioned starters in strongman to get together with a cylinder bag. This gives you symmetrical loads of different shapes. Experienced strongman athletes who want to train everywhere or just do not have the space to have multiple stones lying around can get a set of all the different shaped bags to keep training varied and prepared for competition. For maximum lifts, you can still keep reasonably weighted stoned around (but not a full set) to also address the different challenges to grip when you hold onto cement or cold stone. 

Overview and review of the Slater stone mold

This is an overview of the Slater stone mold including pros, cons, and alternatives. It was published first under which rogue sandbag to get. Follow the links for more details.

 

Overview of the slater stone mold 

Price: $50 - $220 
 
The Slater stone molds are one of the products that Steve Slater promotes together with Rogue. The strongman bags are other products aimed at Strongman that he also showcases on Rogue’s website. The Slater molds range from 23lb to 536lb in various sizes and start at $50. The full specifications are: 
 
  • Made in the USA
  • Designed and Produced by Steve Slater at Slater Hardware in Lancaster, OH (founded 1946)
  • Durable plastic construction, lightweight and portable
  • Build up to 50 or more Atlas Stones off one mold
  • 10 different size options (8" to 24" diameter, resulting in stone weight of 23LB to 586LB)
  • Consistently clean, seam-free stones when preparation directions are followed
  • Molds have produced stones for many record-breaking performances at the highest levels of strongman competition
These are good, easy to transport molds to make your atlas stones wherever you need them, rather than transporting them. 
 

Pros of the slater stone mold 

 
The pros of the slater stone mold are 
 
  • Price 
  • See-through 
  • Durable 
 
The slater stone molds produce up to 50 stones from each mold, if treated with care. Compared to their main competitors from hybrid they are also cheaper. Also, you can see inside them while you are making the atlas stone, which makes the process a little easier. 
 

Cons of the slater stone mold 

 
The cons of the slater stone mold are: 
 
  • Fiddly 
  • No matching funnel 
  • Not sold in sets 
 
Apart from that, you will feel more comfortable with making atlas stones when you already know how to handle cement the slater stone molds are a little more tricks to handle than their hybrid competitors. They come with a little wooden peg to get them apart and with no funnel. The takes a little more finesse to make a stone than with the hybrid molds. Another bummer is that you can not just get a whole set of them in one purchase. You will have to get all of the different molds into your cart with no inbuilt discount. 
 

Alternatives to the slater stone mold 

 
Alternatives to the slater stone mold are: 
 
 
The hybrid mold is the direct competitor of the slater mold to make atlas stones from Cement. While the hybrid mold is not see-through and a little more expensive, it is more user friendly for beginners. You can buy an extra funnel for the cement and when the stone is hardened you can pry the mold apart on the rim that goes around the mold. With the latter, you can not pry apart, but have to go around with the tapping stick. 
 
The rogue strongman sandbags are the option if you do not want to work with cement at all. They come in sizes from 100lb to 400lb when filled with play sand. Other options are crumb rubber or lead shot. The strongman sandbags leave you with more weight options and can be stored and transported easily when emptied. The only downside of them is that they are a lot more forgiving on the user for grip strength as they do tend to give in more. Therefore they are not a true representation of what awaits you in a strongman contest. 
 
The MK d balls are a heavy version of slam balls that go up to 150lb. This is a good option if you want the diameter of the ball you are working with to stay the same, but the weight to get heavier. These can also be used for slams without destroying the floor. The downside is that you will only get one for your purchase while the slater molds can be reused many times over. 
 

Conclusion for the slater stone mold 

 
The slater stone mold is a great option to make stones of all sizes. The instructional videos are also easy to follow and get yuh there. The only downsides of these molds are that they are a little messier than the hybrid molds as they do not provide a funnel and can not be compressed as much. 
View full post