TITAN EZ Load hex bar vs Rogue Castro bar [Article, Video]

This is a comparison between the TITAN EZ load hex bar and the Rogue Castro bar. Follow the links for more details.

Overview and review of the Rogue Castro bar [Article, Video]

This is an overview of the Rogue Castro bar which is made of bare steel and therefore very cost efficient. This article was originally oublished under "Which Rogue barbell to buy". Follow the links to learn more.

Price 275$

Overview

The Castro bar is a bare steel bar which comes closest to what you find in most commercial gyms. This is the lowest price tag you can get from Rogue for a full barbell. This makes it a good fit for anyone on a budget who has to buy a lot of barbells or expects them to be stored outside/transported often. For those scenarios, it is a waste of money to get anything that it pretty or elaborate in function.

The Castro bar weighs 20kg and comes in at 28.5mm diameter. It can take up to 190K PSI tensile strength with a good whip. The knurling is standard and the sleeves are attached via bushing. The loadable sleeve length is 16.50. Based on this it is the lowest priced multi-purpose bar available from rogue. Other bars are either special use or designed for children.

The Castro bar is the option to go for if you want to go spend as little as possible while still maximising the training options. If your gym/facility can also live with the fact, that these bars might look quite beaten up pretty fast, even better.

Pros of the Castro bar

The ultimate reason for the Castro bar are the costs. You still get a Rogue bar which is made in the United States at relatively low prices. The bar still goes through the same basic quality checks and holds a warranty. There are other vendors out there who might send you a bar with a lower price tag. Think twice whether you will get the same customer service, warranty and quality checks which only slightly retails over the cost of the raw materials, never mind the labour.

Cons of the Castro bar

A big con of the Castro bar is the bare steel. This finish is likely to show corrosion and use. This means you will need to take more care of it and maintain it more often. If you already have the labour and the necessary equipment to clean bare steel, you might even turn this into a plus. If you want to drill discipline into a bunch of new recruits you might get in a barbell cleaning session once a month on top of the other equipment maintenance you do.

Learn more about the specs of the Rogue Castro bar and purchase on the Rogue website

Overview and review of the TITAN EZ Load Hex bar

The Titan EZ load hex bar will put you back about $150. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which barbell to get from TITAN”.

Overview of the EZ load hex bar

The EZ load hex bar is a great tool for experienced athletes who want to train their grip or rehab patients who want to get into the deadlift to reap its benefits. The EZ bar is raised from the floor which makes it easier to load plates. You stand inside the frame to lift the weight which makes it less taxing on your back. The features and specifics are:

EZ hex bar details:

raised plate holders for easy loading
2" Tubing for EZ Load Hex Bar Frame
3 different grip diameters, 1", 1.5", and 2" Just rotate to change grips!
Knurled Handles.
10" of loadable sleeve length
Fits 2" Olympic Plates.
Weight plates holders at 10" off the ground.
Weight: 54 LB
Length: 66.33"
Width: 30.9"
Height: 10"
Sleeve length: 10"

A great bar to experiment and develop different types of strength.

Pros of the EZ hex bar

The EZ hex bar is an innovative concept you do not find in every gym. Different options to train your grip can be especially interesting for Strongman athletes. Additionally, also the easy load option, as they usually have to get a lot of plates on their bar. Beginners will struggle less and still get the benefits of a hex bar.

Cons of the EZ hex bar

There are moving parts which means that it is more prone to break after heavy use. This means gym environments with 100s of reps a day by inexperienced lifters or very, very big guys and ladies. As TITAN is known for shortcuts on their welding and finish this is something to be mindful about with this item.

Alternatives to the TITAN EZ hex bar

The Titan hex bar would be an option with fewer moving parts which makes it more robust and less prone to quality issues.

The Rogue trap bar would be an alternative which costs more and has no options for different grips. In return, the finish of Rogue is usually more consistent in quality.

If you want an easy to load trap bar with an inbuilt jacking system and different grips go for the Trap bar from Kabuki strength. This will be top-notch engineering which comes with a price tag to reflect the craftsmanship going into this bar.

Summary for the EZ hex bar

A great addition for your arsenal, but probably get a normal hex bar first.