TITAN Multi grip Camber bar vs Rogue Training bar [Article, Video]

This is a comparison between the TITAN Multi grip bar and the Rogue training bar. Follow the links for more details.

Overview and review of the Rogue Training bar

The Rogue Ohio training bar combines the Rogue Oly and Ohio bar to create a low price training bar for Olympic weightlifting with great whip at an affordable price. This article was originally published in "Which Rogue barbell to buy".

Price 295$

Overview

The rogue training bar takes the core of the higher priced Oly bars and combines it with the sleeves and bushings of the Ohio bar. The result is the lowest priced bar with a great whip in the Rogue selection. This is the bar to get for gyms tailored to the needs of beginner Olympic weightlifters. You still get the feel of the whip while optimizing for cost as they likely are going to wreck the bars quicker.

The training bar weighs 20kg and comes with bushing at a 190K PSI tensile strength. The loadable sleeve length is 16.25 and the diameter of the bar is 28mm. The shaft is made of black zinc while the sleeves come in bright zinc. A standard knurl round this bar into a good package for aspiring Olympic lifters.

The training bar is a good cost safer coming in at 200$ less than the high-end Olympic barbells. This is almost two for one for your Olympic weightlifting needs. I would not equip a gym full of Olympians with this, but when you run a reputable gym that is aimed at making soccer moms and middle-aged dads strong, this is the bar to go for.

Pros of the training bar

The biggest pro is the price. You can not beat 295$ in the rogue selection to get a great whip. Even if you are mainly getting all-purpose barbells you can throw in one or two of these to keep your Oly fans happy.

Cons of the training bar

The training bar has no bearing and only comes in Zinc. Therefore your athletes will train with bars that do not fully represent what happens in competition. This can have an impact on movements like the snatch and clean and jerk which hugely depend on timing and explosiveness. The zinc is one of Rogues poorer coatings in terms of corrosion. Be prepared that you have to replace these bars more often if your gym goes for a very neat and tidy look.

Learn more about the specs of the Rogue Training bar and purchase on the Rogue website

Overview and review of the TITAN Multi-grip Camber bar

The Titan multi grip camber bar will put you back about $150. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which barbell to get from TITAN”.

Overview of the TITAN Multi-grip Camber bar

A camber bar is a great option to bring your bench press to the next level. It is especially interesting when you have been training for years and have wrist pain or if you want to follow the west side method. The camber bar will enable you to use different variations of hand positioning easily on the bench press to let you work the chest muscles from different angles. This technique is often used by experienced powerlifters and strongman to either push through plateaus or to make sure that they can tackle the same weight from various leverage points. The features and specifics of the TITAN Camber bar are:

Camber bar details:

2" Camber for greater range of motion
Multiple grips points to target different muscle groups
Knurling for a secure grip
black powder coat
Fits Olympic weight plates
Overall Width: 82"
Sleeve to Sleeve: 54"
Sleeve Length: 13.75"
Sleeve Diameter: 49.55 mm | 1.95"
Grip Width's: 10" / 20" / 28.5"
Grip Diameter: 1.25"
Weight: 47 LB

This is a good addition to the existing barbell line up in a commercial gym or as a additional bar for the experienced lifter at home.

Pros of the Multi-grip camber bar

This is a good tool to throw something new at your constant gym class members in your commercial gym. Experienced lifters might appreciate giving their shoulders a break from the straight bar bench press which can be taxing on the shoulder joints, especially at very high weights. Strongman competitors will see the benefit of variety in grip set up to be prepared for unforeseen bench press variations in competition.

Cons of the Multi-grip camber bar

The camber bar is probably not the best idea for beginners as they are confused enough to find the right setup for themselves on a straight barbell. Knuckle down on this one first. The benefits will also be marginal for beginners who are just starting out and can also be achieved with EZ bars and other equipment which is readily available in most commercial gyms. As with the Safety and log bar, the camber bar needs a lot of welds to be finished. Unfortunately, this is an area where TITAN has been reported more than once to be behind the competition when it comes to the finish of their product. Your equipment will still be functional, but more prone to wear and tear and look less aesthetically pleasing.

Alternatives to the Multi-grip camber bar

If you want to mix things up a little for the bench press you can also use a log bar. This will make the weight feel different and also put less strain on the wrists than a straight bar.

The Bison bar has a slight curve but is still very similar to a straight bar. This bar can be used for squats and bench presses to put less stress on the wrists or the back.

The Rogue Multi-grip bar is a higher-priced alternative to the multi-grip camber bar from TITAN. Ordering from Rogue makes it less likely that the welds and finish will be of inferior quality, but you will pay a price for this security. This is based on averages, you can still be lucky or unlucky with your purchase from either vendor.

Summary for the multi-grip camber bar

A nice gift for a special occasion or someone who already has a gym. A great addition for a commercial gym to differentiate themselves from the rest of the pack. Not necessarily your first buy.