TITAN Strongman Log bar vs Rogue camber bar [Article, Video]

This is a comparison of the TITAN Strongman Log bar and the Rogue camber bar. Follow the links for more details.

Overview and review of the Rogue Camber bar

This overview of the camber bar was originally published in my comprehensive guide on which Rogue barbell to buy. If you are currently considering to buy a Rogue barbell it is worth a read to get input on the latest models. I update the guide on a yearly basis depending on Rogue's new releases.

Price 295$

Overview of the Rogue Camber bar

The camber bar is another variation of the specialty bars of Rogue. It is very similar to the safety bar with a few differences. The first is that the hands can be placed lower on the frame. This helps even more with athletes suffering from a shoulder injury. The other difference is that the weight swings more during the movement. This helps with bigger core activation. While the safety bar lets you squat more weight deeper the camber bar actively works on balance.

The camber bar comes in at a weight of 85lb. The shafts fit regular clips and plates. The camber bar comes fully welded. Pay special attention to quality when you buy specialty bars. The production process is usually less mechanized than for barbells. You need a good welding job to be safe. Yes, you can get these bars a lot cheaper from craigslist. However, you might end up with a terrible welding job.

Pros of the Camber bar

The camber bar is unusual and will challenge your athletes. Not a lot of people have ever seen, nevermind used a camber bar in the real world. Combining the camber bar and safety bar is especially useful for strongmen who have to get used to moving weights at different angles and positions. If you want to use this as a cheaper replacement for a Yoke carry be cautious You can not put this bar down in the middle of the walk.

Cons of the Camber bar

This bar already weighs 85lb unloaded. It is also very cumbersome and awkward to store. This is a tool for big gyms with lots of floor space. If you are already constrained for space this is not the bar to get. It is also more challenging than the safety bar. If you are a beginner deciding between a safety and camber bar, go for the safety bar.

Conclusion

The rogue camber bar is a good tool especially for strongman training.Alternatives can be the Rogue safety bar or a Rhino hip belt squat to take tension off the shoulders and wrists.

Learn more about the specs of the Rogue Camber bar and purchase on the Rogue website

Overview and review of the Strongman Log bar

The Titan Strongman Log bar will put you back about $150. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which barbell to get from TITAN”.

Overview of the Strongman log bar

The Strongman log bar is a staple of Strongman Training. The pinnacle of this lifting practice is the Austrian oak competitions at the Arnold. This exercise will challenge your balance and all body strength. The log also loads competition plates, which often can be a problem with these bars. The features and specifications of the log bar are:

TITAN log bar details:

Now fits Competition Plates,
welded end caps
1.65" knurled handles
Neutral hand grips at 26" on center.
Fully welded seams for great fit and finish.
14.25" loadable sleeves
Weight: 75 LB
Overall length: 75.5"
Sleeve diameter: 1.9"
Log diameter: 10"
Loadable sleeve length: 14.25"

Good tool to press big weights overhead.

Pros of the log bar

The neutral grip position puts less stress on your wrists for the bench press and the overhead press. It will also teach you better to deal with cumbersome objects to lift them up. The price is also attractive compared to barbells and other competitors.

Cons of the log bar

A log bar can be quite intimidating for beginners as they are heavier and harder to handle than a barbell. They can sometimes be a pain to fit the plates you already have in your gym. As this piece of equipment has a lot of welding to be done and TITAN is known to cut not so the best job on these you might want to opt for a piece of equipment which needs less welding or is from a different vendor.

Alternatives to the log bar

The Atlas bar is TITAN’s all-purpose bar at a reasonable price. There are no welds on this bar which eliminates the risk of getting poor quality. It will also not be as intimidating for beginners as a log bar.

If you still want a log bar you can invest a little more and go for the Rogue Log bar. You will pay more but there are usually no complaints on the Rogue finish.

The hex bar from TITAN is an option too. This will enable you to do deadlifts in a safe and practice farmers walks for a better grip and the carriers which are a part of Strongman competitions.

Summary of the log bar

A good budget option, but you might want to look somewhere else because of the many welds.