TITAN T3 Tall power rack vs Rogue RM 390F

This is a comparison between the TITAN T3 tall power rack and the Rogue RM 390F. Follow the links for more details.

Overview and review of the Rogue RM 390F Flat Foot Monster Rack

Price: 1.211

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster Flat Foot will save you bolting down the rack. You will have no holes in the floor with this one. See the details in this article.

Overview of the RM 390F Flat foot

The RM390F rack is a special rack in the Rogue Line up. IT is one of two racks with the flat foot design. The flat foot design makes it possible that you do not have to drill the rack into the ground to anchor it. This makes the flat foot a very popular option in scenarios where a wood, carpet or rubber floor have already been installed and should not be damaged.

The Flat Foot weighs 335LB and comes in with a width of 24''. It is 93'' high and therefore has a footprint of 54''x'50''. The flat foot is compatible with the accessories of the Monster series. The only thing to consider is that Band pegs and safety spotter arms should not be used with the Flat Foot Monster rack. Get safety pins instead.

How many clients should the Rogue RM390F bring you?

If you think that the Rogue RM390F will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.211$. Adjust the numbers for your own gym accordingly.

Pros of the 390F Flat foot

The biggest pro of this rack is the flat foot design. This means you can install this rack anywhere where there is space. No nasty holes in the floor which need to be refilled once you want to move the rack somewhere else.

Cons of the 390F Flat foot

If you get a half rack you have to think about where to store your plates. In addition, not everyone likes to train in a half rack. IT can be a bit tight for a three-step walk out.

Alternatives to the 390F Flat foot

For the same budget of 1.211$ you have the following alternatives with Rogue:

1x RML 390F Monster Lite @795$

The Rogue RML 390F is the Monster Lite version of the flat foot design. This is a very viable option to save about 500$. You are already in the market for a solution with a small footprint for home use and small athletes. You might as well save a bit more money by going for the slightly less sturdy construction of the same product.

1x Rogue Froning RML 4100C Power rack @1.150$

If you want a full rack that gets you close to the champions this is the rack to go for. Think of the fittest man on earth while training to set new PRs in a full rack dedicated to the greatest CrossFitter of all time.

Conclusion

The 390F Flat foot is a great half rack to use at home which does not need to be bolted down. With this you can train and move whenever it is convenient.

Overview and review of the T - 3 Tall power rack $539

The T3 tall power rack will put you back about $500. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500”

Overview of the T3 power rack

The Titan T3 comes with 2x3 steel tubes instead of the other racks from TITAN which are available as 3x3 and 2x2. You can also get the T3 as combos with a pulley or a bench depending on your needs. With the 2x3 beams, you get a good solution for your home gym and wide range of attachments which are available from Titan. The price is usually around $500 - $600 depending on the time of year and Discounts applicable. With the T3 you have the following options for your rack

Short 24" Deep Power Rack

Weight: 230 LB
Height: 82 1/4"
Height of pull up bar: 77"
Outside width: 53 1/4"
Inside width: 42 1/8"
Outside depth: 32 3/4
Inside depth: 24"
Floor space: 12.11 square feet
Rackable Capacity: 1,100 LB
Whole Rack Capacity: 4,400 LB

Tall 24" Deep Power Rack

Weight: 281 LB
Height: 91 1/8"
Height of Pull Up Bar: 89"
Inside Width: 42 1/8"
Outside Width: 53 1/4"
Inside Depth: 24"
Outside Depth: 32 3/4"
Floor Space: 12.11 square feet
Rackable Capacity: 1,100 LB
Whole Rack Capacity: 4,400 LB
Material: Steel

Short 36" Deep Power Rack

Weight: 254 LB
Height: 82 1/4"
Height of pull up bar: 77"
Outside width: 53 1/4"
Inside width: 42 1/8"
Outside depth: 44 3/4
Inside depth: 36"
Floor space: 12.11 square feet
Rackable Capacity: 1,100 LB
Whole Rack Capacity: 4,400 LB

Tall 36" Deep Power Rack

Weight: 281 LB
Height: 91 1/8"
Height of Pull Up Bar: 89"
Inside Width: 42 1/8"
Outside Width: 53 1/4"
Inside Depth: 36"
Outside Depth: 44 3/4"
Floor Space: 16.7 square feet
Rackable Capacity: 1,100 LB
Whole Rack Capacity: 4,400 LB
Material: Steel

With this, you have many options to think about how to integrate your future T3 into your home gym.

Pros of the T3

A definitive pro for all TITAN products is their price compared to comparable alternatives in the market. You usually pay about half of what you might pay with others. To sweeten the deal shipping is also free with TITAN in the US. THis makes the T3 a very good option if you are on a tight budget or need to buy anything in bulk. You can also choose from multiple colors.

Cons of the T3

Who wants to compromise if you are already buying from a vendor known for its low prices. You might as well upgrade to the 3x3 versions. If you are in Europe you want to closely watch the shipping prices as they might even exceed the price of the rack.

Alternatives to the T3

The TITAN rack is the top of the crop rack from TITAN. It has 3x3 uprights and 1” bolts. This is the heaviest and sturdiest rack you can get from TITAN. Compared to market prices it is also very affordable.

The X3 is basically the same model as the Titan rack with two differences. It doesn’t have numbered holes on the uprights and the keyhole design. This means that you can use fewer attachments with it which you have not necessarily bought from Rogue.

The T2 model comes in various shapes and heights and can be configured differently for your home gym to make it fit your space. The main difference to the other Titan racks is that the uprights are 2x2 instead of 2x3 or 3x3.

Summary for the T3

The T3 is a Great middle of the portfolio option to train for athletes of most sizes. If you are an elite lifter or very big you might want to upgrade.