TITAN X3 half rack vs Rogue RML 690 [Article, Video]

This is a comparison between the TITAN X3 half rack and the Rogue RML 690. Follow the links for more details.

Overview and review of the Rogue RML 690 Power rack

The video above summarises my personal opinion for purchasing a Rogue RML 690 for a home gym. If you want to just lean back and get information, watch it and then dig into the details below. In the following paragraphs you will find details on dimensions and alternative choices. I invite you to leave a comment on Youtube if you have direct questions.

Price: 1.568

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue 690 bring storage and rack space to your basement or local gym at a resonable price for Rogue. See the details in this article.

Overview of the RML 690

The RML 690 is a hybrid of the Rogue R6 Power rack and the RM6 Monster rack. The RML 690 is compatible with the Rogue Monster lite series and provides you with a full and half rack in one go. The half rack can either be used for storage or to train additional athletes/clients.

The RML 690 comes in at 530 LB with a length of 76'''. It is 49'' wide and has a height of 90.375''. The entire footprint comes to 80'' x 53''. It can be mounted to a wall with the Monster Lite Rack Wall mount kit. IT comes in black and therefore retails at a lower price than the RML690C.

How many new clients should the RML 690 in bring you?

If you think that the Rogue RML690 will bring you 6 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 3.600$ net new revenue against an investment of 1.568$. Adjust the numbers for your own gym accordingly.

Pros of the RML 690

The RML690 gives you the needed storage and training capabilities to have multiple clients or athletes train at the same time. As long as you have space this full/half rack combo provides a gym in itself. If you will use it for your home gym you can also convert the back rack into shelving for your kettlebells and dumbbells.

Cons of the RML 690

In many applications, the half racks at the back are poorly utilized and therefore a waste of space. If you already have good plate storage options or have a home gym with limited space you might be better of saving many and space by going for a 490 instead of a 690.

Alternatives to the RML 690

For the same budget of 1.568$, you can get the following alternatives from Rogue

1x Rogue RML 490C @ 1.075$

With this alternative, you can save 500$ and get to choose your favorite color for your rack. If you do not have specific plans for the back half rack, this is a great option to save money and still get better value out of your purchase.

1x USMC PUll Up RIg @ 1.550$

If you are running a gym and want to run more classes to maximize revenue the USMC Pull up rig might be a better choice for you than the RML 690C. You can have more people train at the same time at this rig, as long as they do not want to lift heavy at the same time.

Conclusion

If you want to save some money on Rogue products and do not care about the color of your rack this is a good option. Make sure that you know what you want to do with the half rack in the back of the RML 690 before you purchase. Otherwise go for something smaller as it is likely that the space will be left unused.

Overview and review of the X3 half rack

The TITAN X3 half rack will put you back about $550. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500

Overview of the X3 half rack

The X3 half-rack gives you the safety of a power rack while optimizing for floor space. You can even store your plates on it if you want to. The 3x3 steel tubes of this rack also provide Westside hole spacing which allows for smaller increments on your bench press setup. If this is the rack for you it comes with the following features and specs:

3" x 3" 11 gauge steel uprights.
Westside hole pattern through bench zone.
2" hole spacing above and below.
1,000 + lbs. capacity.
Pair of UHMW lined X-3 J-Hooks included.
Double-sided gusset plates.
Overall height: 92"
Overall width: 49"
Overall depth: 48"
Product Weight: 250 LB
Finish: Black Powder Coating
Floor Space: 16.3 sq ft (49" x 48")
Rack depth: 17"
Front upright height: 92"
Rear upright height: 72"

This is a great option for college dorms or small spaces at home. It can also be used to have high quality in a gym while saving a little in overall floor space for a line of racks.

Pros of the X3 half rack

As with most of the TITAN line up first and furthermost the price for what you are getting. Apart from that, a half rack can be a great space saver whilst still functioning as a full rack. Especially the possibility to store your plates on the second set off uprights might make it superior to a squat stand.

Cons of the X3 half rack

Squatting inside the rack might leave you constrained. Especially if you are very tall and big. Small athletes will have no problems, but if you are the next Eddie Hall or generally like a bit of space to do your exercises, go for a full rack like the T3 instead.

Alternatives to the X3

These are other options for the X3 half-rack:

If you already have a bench or just don’t need one you can invest just a little extra and get a colored rack.

Another way to go is to save on the color to have more budget for different size options on the T3 and maybe even adding some plate holders. The T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.

If you want to stay within budget but start your gym with 3x3 tubing you can go for the X3 squat stand. This is a good option for big and/or experienced lifters who prefer the freedom and flexibility of a squat stand, yet still, move big weights. I recommend that you have enough space and experience on how to drop weights from a squat position if you opt for a squat stand. Spotter arms are nice with a stand but usually useless. You either miss them on a hardcore drop or the entire unit comes down because you didn’t bolt it to the ground.

The T3 folding rack saves you about $200 on the T3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.

Summary for the X3 Half rack

If you are ok with squatting outside the rack and still want 3x3 uprights and are storage this is a great option for you. If you have Eddie Hall’s size, stay away from this as you will constantly bang off the uprights of you are squatting inside your rack. This injury risk is not worth the savings compared to a T3.