REP fitness PR-1050 rack vs Rogue Mono stand
This is a comparison between the Rep Fitness PR-1050 rack and the Rogue Mono stand. Follow the links for more details.
Overview and review of the Rogue Mono stand
Related articles
Overview of the Rogue Mono Stand
The
Rogue Mono stand is an interesting variation on the SML 1 Squat stand. With this setup, you can unrack the weight and there is no need
to walk it out. This is especially good for lifters who are injured or when you want
to attempt a one repetition maximum. This design makes acquiring a Monolift station very affordable compared
to other options in the market.
The
Rogue Mono stand comes in black and is manufactured in Columbus, Ohio. The dimensions of this Stand are 57'' in width, 86'' in length and 78'' in height. The overall weight of the unit comes
to 310LB. This leaves it with a footprint of 86''x57''. The stell notes are made of 3x3'' 11 Gauge steel.
If you want
to get serious about
powerlifting and meets
which allow for
monolift
stations, this design is the one for you. It is a lot easier
to handle than a traditional
Mono Stand and less prone
to get broken. The arms of traditional
mono stands have the tendency
to block over the years. There is nothing worse than a lever that is not moving out of the way when you have a very heavy weight on your shoulders.
Pros of the Rogue Mono stand
The design makes it clever and uses a lot less material
to create the same effect as other
mono stands. With this, even an average gym can implement a
mono stand to attract more customers or help injured athletes. If you are serious about
powerlifting and want
to save some money on a
mono stand this is the way
to look.
Cons of the Rogue Mono Stand
The biggest flaw of this design is that you can not use the
mono stand by itself. You need another person with you
to rerack the weight. If you always train with other monster lifters this is great. However, for many, this is just simply not the case.
Alternatives to the Rogue Mono stand
The Monolift Attachments are available for Monster, Monster lite and Infinity series of Rogue. The adjustable version is only available for Monster and Monster lite. I would definitely recommend investing the extra 30 - 40$ to get the adjustable version. This way it will be easier for you to use the Monolift attachment for the squat and bench press instead of having to get the wrench ut each time you swap.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.