REP fitness PR-1050 rack vs Rogue Mono stand

This is a comparison between the Rep Fitness PR-1050 rack and the Rogue Mono stand. Follow the links for more details.

Overview and review of the Rogue Mono stand

The Rogue Mono Stand rack comes in at $950 and is one of the better options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000"

Overview of the Rogue Mono Stand

The Rogue Mono stand is an interesting variation on the SML 1 Squat stand. With this setup, you can unrack the weight and there is no need to walk it out. This is especially good for lifters who are injured or when you want to attempt a one repetition maximum. This design makes acquiring a Monolift station very affordable compared to other options in the market.

The Rogue Mono stand comes in black and is manufactured in Columbus, Ohio. The dimensions of this Stand are 57'' in width, 86'' in length and 78'' in height. The overall weight of the unit comes to 310LB. This leaves it with a footprint of 86''x57''. The stell notes are made of 3x3'' 11 Gauge steel.

If you want to get serious about powerlifting and meets which allow for monolift stations, this design is the one for you. It is a lot easier to handle than a traditional Mono Stand and less prone to get broken. The arms of traditional mono stands have the tendency to block over the years. There is nothing worse than a lever that is not moving out of the way when you have a very heavy weight on your shoulders.

Pros of the Rogue Mono stand

The design makes it clever and uses a lot less material to create the same effect as other mono stands. With this, even an average gym can implement a mono stand to attract more customers or help injured athletes. If you are serious about powerlifting and want to save some money on a mono stand this is the way to look.

Cons of the Rogue Mono Stand

The biggest flaw of this design is that you can not use the mono stand by itself. You need another person with you to rerack the weight. If you always train with other monster lifters this is great. However, for many, this is just simply not the case.

Alternatives to the Rogue Mono stand

There the following alternatives to the Rogue Mono stand the Rogue portfolio:

The Monolift Attachments are available for Monster, Monster lite and Infinity series of Rogue. The adjustable version is only available for Monster and Monster lite. I would definitely recommend investing the extra 30 - 40$ to get the adjustable version. This way it will be easier for you to use the Monolift attachment for the squat and bench press instead of having to get the wrench ut each time you swap.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1050 Rack $269

The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:

72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment available as an optional upgrade)

This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.

Pros of the REP PR-1050 Rack

The pros of the REP PR-1050 are:

All in one design
Price
Short design

If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.

Cons of the REP PR-1050 Rack

The cons of the REP PR-1050 are:

700lbs capacity limit
Limited upgrade options
Not ideal for the west side method
Imported

This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.

Alternatives to the REP PR-1050 Rack

The alternatives to the REP PR-1050 rack are:

The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.

The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.

The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.

Conclusion for the REP PR-1050 Rack

If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.