TITAN Chest supported row bench vs Rogue Westside bench 2.0

This is a comparison between the TITAN chest supported row bench and Rogue wetsside bench 2.0 including pros, cons, and alternatives. This article was originally posted in Which TITAN bench to get? Follow the links for details.

Overview and review of the Rogue Westside bench 2.0

The Westside 2.0 comes in at $725 and are a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Overview of the Westside bench 2.0

The Rogue west side 2.0 is a bolt-together version of the Westside bench to bring down the cost in production and shopping. You will have more moving parts, but it is still a 1000+ pound bench press set up for the serious athletes. One of the main features of this bench is that you can adjust it in 1” increments and use it with bands and chains effectively. If you are a fan of the west side training method and benching big this is a great option. The specifications of the Westside 2.0 bench are:

Made in the USA
2x3" 11-Gauge Uprights with Westside hole spacing
Total Height: 54.625"
Bench Height: 17.5” (adjustable up and down by 1" increments)
1000+LB weight capacity
Your choice of either a 12" wide standard bench pad or a 14.5" wide Thompson Fat Pad™ (at additional cost)
NEW Bolt-Together Design with 0.625" Hardware
NEW 7-Gauge Reinforced Steel Spine Under Pad
NEW Laser-Cut Rogue Side Panels
Infinity J-Cups with UHMW inserts to protect the bar knurl
24" Pin/Pipe Safety Set
4 Adjustable Band Pegs
NEW Optional Spotter Decks (at additional cost)
Color: Black

If you are into the Rogue setup for west side benching, this is the way to go.

Pros of the Westside 2.0

This is a lower-cost version of the west side bench and is probably one of the most cost-efficient setups in the market I which you can comfortably go to 1000 pounds for the bench press.

Cons of the West side 2.0

Compared to other bench stations or combos you will have little to no plate storage and no support for heavy incline or decline bench presses. If you care about a 1000 pound bench press you will probably more than this.

Alternatives to the Westside 2.0

Alternatives to the Westside Bench 2.0

If you care about a west side bench I would conveniently assume that you already own a normal bench press setup or just don’t care about getting a portable bench.

The west side bench is the big brother of the 2.0. You will have fewer moving pieces and bigger beams which brings the cost up but also means that you get more integral stability. If you have the money and do not want to transport the bench often, why compromise?

The reflex incline is an alternative to consider or even an additional purchase to the west side bench 2.0. If you are equipping a gym with a west side bench I know you mean business, so where are your freaks going to do their incline bench presses? Same goes for the decline.

Summary for the Westside 2.0

The west side 2.0 is a great option for the serious athlete who wants to train at home with a buddy. If you are equipping a professional gym you might as well go for the big one.

Overview and review of the TITAN Chest supported row bench

This is an overview of the TITAN chest supported row bench including pros, cons, and alternatives. This article was originally posted in Which TITAN bench to get? Follow the links for details.

Overview of the chest supported adjustable row bench

Price: $464.99

The chest supported adjustable row bench is a machine that specifically isolates the back muscles and prevents lower back pain when you work with barbell rows. It also allows you to do weighted back raises, especially if you go very heavy. Some of the international elite powerlifters recommend this exercise to build a stronger back. Some bodybuilders also recommend it. This makes the chest supported row bench a niche product for individuals or gyms who work a lot with barbells and have serious lifters in their midst. If your rows are a little lighter, you can also achieve similar results with a simple free-standing barbell row. The full specifications of this machine are:

Weight: 128 LB- Adjustable Seat Height: 30 1/2” to 37 1/4"
Adjustable Depth: 68 1/2" to 65 1/2”
Adjustable Width: 55 1/2” to 42”- Seat Length: 18”
Seat Width: 9 1/2"- Seat Thickness: 2 3/4”
Band Peg Length: 5 1/2”
Footplate Dimensions (per side): 21 1/2” x 24”

This is a good addition to your home gym or commercial gym if you have to work on your back and space. Still, I personally think there some better purchases you can make for your gym for $400 like a set of good kettlebells, especially some heavy ones for swings, sumo deadlifts, split squats, and front squats.

Pros of the TITAN chest supported row bench

Pros of the TITAN Chest supported row bench are:

Spine protection
Goes up to very heavy setups
Works with a barbell

This is a great machine to make heavy rows with the barbell a lot safer. You will also isolate your muscles in the back a lot more. So if you want to work on your lower back and back with heavy loaded rows and back raises, this is a good machine to get. If you want to cut out any kind of activation from the hips or lower back you might want to up for a seal row bench.

Cons of the TITAN Chest supported row bench

The cons of the TITAN chest supported bench are:

Limited use
Space requirements
Cumbersome setup

The chest supported row bench has a very limited range of exercises you can do at that particular station. You will also need to get a barbell in place and load it. This needs to be lifted on the two pins in the starting position. While it is not a lot of setup, you might as well to regular barbell rows, especially when you do it for mass rather than maximum strength. In a home gym scenario, this machine will eat up space where you can place a GHD or a rack. If you need to decide between this and a GHD, I personally think the GHD is the better option as it gives you a similar effect in your training, but more variety for exercises.

Alternatives to the TITAN Chest supported row bench

Alternatives to the chest supported row bench are:

Seal bench
GHD machine
Adjustable bench
Rogue donkey

If you want to use an extended range of motion for rowing exercises while eliminating the lower back motion, the seal row is a very good option. To perform these rows you need a bench or station that enables you to elevate yourself so that the arms are fully extended while you lie on the bench. Then you start rowing.

A GHD machine helps you to do back extensions, situps and Glute ham raises. This machine has roughly the same size as a Chest supported row bench. They are usually slightly more expensive but more versatile. Definitely the better pick for a home gym that has that extra space beside a rack, but not much more.

An adjustable bench with a good pair of dumbbells can be used in a similar way to the chest supported row. just lay on the bench on your stomach and bring it to an incline bench press position. It is not the same thing, but a lot more space-efficient. You just have shell out more money for a proper adjustable bench.

The Rogue Donkey is a combination of a reverse hyper and a GHD machine. While it is quite pricey, I think this is the machine to cover all over your lower back development needs in one station. You still won't be able to do very heavy back raises or work with a barbell, but I think the trade-off is there. If you have tons of space, these questions become less relevant and you can get cheaper, specific one purpose equipment and spread them out over your floor space.

Conclusion for the TITAN chest supported row bench

The chest supported row bench is a good tool in a strength-focused commercial gym with a lot of space. There you have space and clients who can get good use out of the heavy rows to form massive backs. Home gym owners will probably just use the barbell for rows. If the basement or garage is bigger, you can look at the Rogue Donkey for all of your lower back needs, as long as your wallet allows for it.