TITAN T3 Yoke vs Rogue R3 rack

This is a comparison between the TITAN T3 Yoke and the Rogue R3 rack. Follow the links for more details.

Rogue R3 power rack

The Rogue RM4 fortis rack comes in at $695 and is one of the low-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

Download the free Rogue barbell Overview

What else to consider from Rogue

Overview of the R3

The Rogue R3 rack has been inspired by the model that Louie Simmons used in Columbus, Ohio to build some of the best powerlifters in the world. It ships from and is built in the US. This rack is a solid option for home warriors and gym facilities alike.

The R3 weighs in at 200LB and comes in different heights, The standard height is 90'' while the shorts version comes in at 84''. the steel notes are made 2x3'' 11 Gauge Steel. The R3 is part of the Rogue Infinity series and compatible with accessories and parts from the same line. It ships with J cups, band pegs, pin/pipe safeties and a Fat/Skinny pull up bar. It also provides Westside hole spacing to you in the middle of the rack.

This is a solid rack from an older product line of Rogue which you can use for building out your gym. Compared to the MOnster and Monster lite series you will save somewhere between $400 to $1000 depending on your build.

Pros of the R3

This is a good value for money option from Rogue to start your gym or built a powerlifting station if you do not have one yet. It is also lighter and smaller than most other racks from the Rogue portfolio and will serve you well.

Cons of the R3

Haf racks can sometimes be a little crammed, especially when you also want to store your plates on them. Consider either getting a bigger rack or taking care of your plate storage somewhere at the sides of the rack itself. If you factor in plate storage you might as well bump up the budget for the rack.

Alternatives to the R3

Alternatives to the R3 power rack are

The R3BT is the same rack but will be delivered in smaller chunks. This makes it easier to carry the rack to its destination, especially if it is up windy staircases. Apart from this, there are no differences between the two models.

The RE4 is a full rack from the Echo series. If you would like to get more rack space for roughly the same price, this is the one to go for. Be aware that the Echo and Infinity series are at the lower part of the Rogue food chain and do not get as many updates and upgrades as their bigger brothers from the Monster and Monster lite series.

Te RML3WC is a good option for garage gyms in which you still want to get your cars in. They can be folded to the wall and therefore save space. The only downside is that you will be very close to the wall and have to bolt it in there.

Overview and review of the TITAN T3 Yoke

The TITAN T3 Yoke with pulley will put you back about $350 - $370. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T3 Yoke

Yokes are great alternatives to power racks as they are portable, come with the plate storage and can be used for home carries. If you want to add a versatile tool to your gym you should definitely consider a yoke. Here are the specs and features of the TITAN version:

Yoke details

Use as a Squat / Press Stand, Push or Drag Sled, or Yoke.
A staple for Strongman training.
Adjustable crossbar to custom fit your height
Integrated vertical plate storage.
2" hole spacing on uprights
1" Westside spacing through the bench zone
92" design makes for an ideal pull up bar height.
2.95" Crossbar diameter.:
Weight: 178 LB
Height: 92"
Inside width: 45"
Footprint: 51" x 52"
Uprights: 2"x3" 11 gauge steel
Weight capacity: 750 LB

Pros of the Yoke

Multifunctional Gym Equipment which is a great addition if you have to space to do carries. Kills many birds with one stone at a very good price.

Cons of the Yoke

This item has a lot of welding to be done. These might be of poor quality with TITAN is this is where they often cut corners to justify the low prices. This will be mostly cosmetic, not functional.

Alternatives to the Yoke

T3 fold back rack
X2 and incline combo

The T3 uses a folding concept but with 2x3 steel tubes to be stored against the wall when you don’t use it.

The X2 is one of the cheapest series in the TITAN line up. With its 2x2 steel tubes, it uses the least material to build a rack. If you want to downsize on all ends to fit a bench and rack into $500 budget comfortably, this is for you.

Summary for the Yoke

A Yoke is always a good, cost-efficient option for many use cases. TITAN's price on it makes it extra sweet.