REP fitness fractional plates vs Rogue machined plates

This is a comparison between the REP fitness fractional plates and the Rogue machined plates. Follow the links for more details.

Overview and review of the Rogue Machined Olympic plates

The Rogue machined olympic plates will set you back about $582 dollars or $5.24 dollars per kg. These plates are especially good to use for home gyms who want some extra precision. This overview has originally been published in the article "Which rogue plates to buy" which you can find on this blog.

Most popular Rogue plates

This is an overview of the most popular Rogue plates on Marathon-Crossfit.com in 2020 based on views and click thoughs for purchase on Rogue Fitness. If you want more detail on how the data was collected and what the strengths and shortcomings of the data set are you can dig deeper on what were the most popular rogue products in 2020.

These were the most popular rogue plates on Marathon-Crossfit.com. On the plates, I would caution between overall popularity and the popularity of my site. The plates listed below are more niche than the Rogue bumpers, the calibrated steel plates, and competition bumpers. If you want a safe bet for your use case these three might be better, as more people buy them.

The Fleck plates are a variation on the Rogue bumper plates which have been infused with red, blue, yellow, and green to indicate the weight of the plates. The splash of color also makes them more fun compared to the regular bumpers. If you find the rogue bumpers too bland but also do not want to shell out more than $1000 on calibrated steel plates or competition bumpers to get color coding then the Fleck plates are for you. You can read the full review of the Fleck plates via this link.

The Rogue Urethane plates are color-coded and also claim the best durability in the Rogue plate portfolio. Whether that warrants the high price tag compared to regular bumpers is a question you have to answer for yourself, but I personally don’t think so. If you want to spend more money on plates, spend it on precision rather than durability in my personal opinion within the Rogue portfolio. Rogue equipment is known to be more durable than the competition so I would not put too much focus on this unless you run an Olympic training center where the plates will go through hundreds of heavy drops per day. You can read the full review of the Rogue Urethane plates here.

The Rogue black training plates have the best dead drop in the Rogue portfolio which means they bounce the least when dropped from overhead. These are the plates which I use most often as I like the design because black does not show marks as easily as other plates. You can read my full review of the Rogue black training plates via this link.

The 6 shooter plates from Rogue are often overlooked as a good option for commercial gyms. They are relatively cheap compared to other Rogue plates and easier to handle in a gym setting where you have a lot of them flying about. The downside is that you can not use them for overhead drops as this will wreck the plates, floor, and barbell in the process. You can read the full review of the rogue 6 shooter plates via this link.

Overview of the Rogue Machined Olympic plates

These plates are Rogue take on the standard metal plate. They have come up with a great design which combines grey hammertone with black writing. Many lifters love the sound of multiple metal plates clanging together when they post a new pr. These plates are made to precision with a 2 to 3% tolerance which sets them apart from the rest of the industry. These are the type of plates which a no-nonsense dungeon gym will hold. You get quite a lot of weight for your dollar with these ones.

Weight / Diameter / Thickness / Price per pair

45LB / 448mm / 1.50'' / $160

35LB/ 360mm / 1.50'' / $128

25LB / 300mm / 1.50'' / $ 105

10LB / 228mm / 1.22'' / $48.50

5LB / 195mm / 0.83'' / $32

2.5LB / 162mm / 0.63'' / $23

Available sets

245LB one pair each size $582

Pros of the Rogue Machined Olympic plates

The biggest pros are the price and machine precision. Compared to the calibrated steel plates and high-end bumpers you get the same amount of weight for roughly half the price. Metal also feels different when you move it around. It makes more noise and just feels rawer. You will also be able to fit more weight onto your barbell.

Cons of the Rogue Machined Olympic plates

These plates have no color coding and you can not always be sure what you put on the bar. This makes it more likely to misload a lift. If you do not have a platform these plates are also a lot more likely to eat into your floor on deadlifts than bumpers. They will also not sustain constant dropping of the weight from overhead. Especially your barbell will suffer and deform quickly if you use them for Olympic lifts. In addition, they will also not age well in damp places as they will oxidate.

Alternatives to the Rogue Machined Olympic plates

Alternatives to the Rogue Machined plates are:

If you still want that metal feel, can tolerate a bit more variance on the finish and prefer black, the Rogue Olympic plates might be for you. They will also come in at an even lower price point.

Bumper plates are the alternative for the home gym warrior who wants to protect their floor and lift overhead. You will fit less weight on the barbell, but you can train without a platform without wrecking the floor.

The calibrated steel plates come with color coding and are IPF approved. If you want to prepare for your next powerlifting meet and train like the pros, this is the option for you.

Overview and review of the REP fitness fractional plates

This is an overview of the REP fitness fractional plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

Fractional plate set $39

Fractional plates are a great tool to progress further, especially if you are very light or for lifts on which you can not really move big weights. With fractional plates, you can increase the weight of loadable dumbbells for awkward movements or push your one-rep maximum on an oly lift ever so slightly. This set of fractional plates includes:

0.25 Kg (White) - Diameter: 4.25" Thickness: 3/16"
0.5 Kg (Green) - Diameter: 4.25" Thickness: 3/8"
0.75 Kg (Blue) - Diameter: 4.25" Thickness: 1/2"
1.0 Kg (Red) - Diameter: 4.25" Thickness: 3/4"

With this, you are set to bridge any minute gap between two progressions. If you are a huge fan of the Wendler 5/3/1 method you also might want to get a set of fractional plates.

Pros of the REP Fractional plate set

The pros of fractional plates are:

Allow you to microload

This is the main and probably only reason to get yourself some fractional plates. If you struggle on a certain plateau and can move in 2.5kg or 5kg increment these come in handy.

Cons of the REP Fractional plate set

The cons of fractional plates are:

Not used often
Easily stolen
Break easy

If you know how to use them, you won't use them very often unless you train Wendler 5/3/1. In a commercial gym most people won't even know how to use them properly. When used incorrectly they are also more likely to crack or deform than other plates. Probably the biggest con for commercial use is that these get stolen or lost. In any gym, I have been in that stocked these they just seemed to disappear over time.

Alternatives to the REP Fractional plate set

Alternatives to the rep fractopnal plates are:

Rogue fractional plates
TITAN fractional plates

These are not hugely different and it comes down to price. Remember that you will pay the shipping costs, so don't cut off your nose to spite your face. If you have a big order with TITAN or Rogue just throw the fractional plates in rather than getting them separately from REP causing shipping cost.

Conclusion for the REP Fractional plate set

Fractional plates are great for small lifters in general or big lifters who just need 5kg extra on their one-rep max or someone who wants to push some awkward lifts or grip exercises to the next level. Most average gym clients will not know how to use these properly and lose or break them.