REP fitness PR-1050 rack vs Rogue R3 bolt together

This is a comparison between the Rep Fitness PR-1050 rack and the Rogue R3 Bolt together. Follow the links for more details.

Overview and review of the Rogue Bolt together R3

The Rogue R3 bolt together rack comes in at $725 and is one of the mid-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

What else to consider from Rogue

Overview of the R3

The R3 Rogue Bolt together rack is part of the Rogue Infinity series and comes in black. It is manufactured in Columbus, Ohio. This rack is special as it is delivered in more parts than the standard R3. This makes it easier to install in narrow settings and to transport.

The R3BT is 24'' or 30'' in length and 43'' wide. The height comes to 90.375''. The stell notes are made of 2x3'' 11 Gauge steel. The total footprint comes to 34'' or 40''x53''. The R3 weighs about 200LB. As part of the Infinity series, this rack is compatible with the accessories from this line. It ships with 4 band pegs and to safety pins. A Fat/Skinny pull up bar is also included.

This is a good variation on the standard R3 which is a little more pricey but gives you more options for the installation itself. If you need a versatile half rack this is the way to go.

Pros of the R3

This rack is ideal if you have to get it up narrow staircases. If you want to install your rack in an attic or your gym is somewhere up a lot of stairs.

Cons of the R3

The infinity series is part of the Rogue portfolio that probably will get less attention over the years. Rogue has the Monster, Monster Lite, Infinity, and Echo series. The most additions to the portfolio have been made in the MOnster and Monster lite bracket. So don't expect too many extras for this rack, if you choose to buy it and work from the options already available.

Alternatives to the R3

Alternatives to the R3BT are:

The R3 is the same rack which comes in bigger chunks. If you have loads of space to install it and do not have to bring it up narrow staircases, go with this option.

The RM4 Fortis rack costs only slightly more money but will make you part of the Monser family of Rogue. If you want to protect your investment long term you might want to spend the extra $200 to have access to more upgrades instead of the R3BT.

If you want to acquire a full rack instead of a half rack for roughly the same money, go for the RE4. The RE4 is part of the Rogue Echo series and will set you back $650. If you only want a rack and do not care too much about upgrading it in the future this is a very good alternative to the RE3BT.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1050 Rack $269

The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:

72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment available as an optional upgrade)

This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.

Pros of the REP PR-1050 Rack

The pros of the REP PR-1050 are:

All in one design
Price
Short design

If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.

Cons of the REP PR-1050 Rack

The cons of the REP PR-1050 are:

700lbs capacity limit
Limited upgrade options
Not ideal for the west side method
Imported

This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.

Alternatives to the REP PR-1050 Rack

The alternatives to the REP PR-1050 rack are:

The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.

The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.

The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.

Conclusion for the REP PR-1050 Rack

If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.