REP fitness PR-1050 rack vs Rogue RML490

This is a comparison between the Rep Fitness PR-1050 rack and the Rogue RML490. Follow the links for more details.

Overview and review of the Rogue RML 490

The Rogue RML 490 rack comes in at $983 and is one of the better options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000"

What else to consider from Rogue

Overview of the RML490

The RML 490 rack is the no-nonsense full rack version from Rogue for the smaller pocket. with $983 you don't break the $1000 ceiling and still get a great piece of equipment. The RML 490 is available in black and made in Columbus Ohio. It weighs in 336LB.

The dimension of the RML 490 as 49'' in width and length for a footprint of 53'' by 53''. The height is standardized to 90.375''. The RML 490 ships with J-Cups, Band Pegs, and safeties to get going once you receive it. A fat skinny and a skinny bar are also included for pull-ups. The stell notes are made from 3x3'' Gauge Steel with Westside hole spacing.

This rack is a good option if you do not want to get fancy and stay within budget. With the Monster lite series, you also get one of Rogue's long-standing lines with great customer support.

The Rogue RML-490 is a great option when you want to train Westside at home or if you want to upgrade your gym to attract more powerlifters. IT is compact and does the job for the big three lifts and beyond.

Pros of the RML 490

One big pro as the price tag and what you get for it from Rogue. Being just slightly below $1000 it does not go over the psychological barrier that many buyers set for themselves when going out to buy a rack. With the two bars and westside spacing, it also leaves you with a lot of flexibility for different setups to push your total to the max.

Cons of the RML 490

The RML 490 has no numbering of the holes, no color option and is also fixed in height. This puts it at a disadvantage compared to other Rogue racks. In addition, you also enter the monster Lite series of Rogue which usually has fewer updates with new upgrades then the Monster series.

Alternatives to the RML490

Alternatives to the RML 490 are

The RM4 fortis would be roughly the same budget but in the Monster series of Rogue. If you don't care about the westside spacing but think that having numbered holes would be better for you, go for the RM4 Fortis instead.

The RML 490C is the same rack but adds a splash of color. If you always wanted your rack in blue or orange to match the rest of your gym, furniture or interior design, this is the option to go for instead. The only con is that it comes in with a price which is slightly above $1000.

The RML 690C is an option when you need more storage space and want to have a full and a half rack in one. This is the option which will help you to get more utensils and strength equipment on the rack, rather than the walls of your gym.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1050 Rack $269

The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:

72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment available as an optional upgrade)

This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.

Pros of the REP PR-1050 Rack

The pros of the REP PR-1050 are:

All in one design
Price
Short design

If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.

Cons of the REP PR-1050 Rack

The cons of the REP PR-1050 are:

700lbs capacity limit
Limited upgrade options
Not ideal for the west side method
Imported

This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.

Alternatives to the REP PR-1050 Rack

The alternatives to the REP PR-1050 rack are:

The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.

The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.

The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.

Conclusion for the REP PR-1050 Rack

If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.