REP fitness PR-1100 rack vs Rogue RML 390F

This is a comparison between the Rep Fitness PR-1100 rack and the Rogue RML 390F. Follow the links for more details.

Rogue RML 390f flat foot

The Rogue RML 390F rack comes in at $795 and is one of the mid-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

What else to consider from Rogue

Overview of RML 390F

The Rogue RML 390F is an option from Rogue that does not need to be bolted to the floor. You will get a half rack for a reasonable price which can be placed anywhere from your garage, to one of the spare bedrooms or in the corner of an already established gym. It comes in black is manufactured in Columbus, Ohio.

The 390F weighs in at 295LB with a length of 48'', a width of 49'' and a height of 92.375''. Note that because of the extra beams at the bottom it is slightly higher than the average 90.375'' from Rogue. It comes with Westside Hole spacing and ships with a Single Skinny or a Fat/Skinny pull up bar, band pegs, and J Cups. The stell notes come in 3x3'' for the uprights and 2x3'' for the bases. With this rack, you are entering the Monster lite series of Rogue and the accessories available in there.

Pros of the RML 390F

This rack is easy to install and light. With this, it can be added to any kind of floor that you do not want to drill into. This can be especially beneficial when a gym already has been outfitted or your landlord does not allow for these alterations to be made. With this, you are set up and ready to go in no time, while it will also take up little space.

Cons of the RML 390F

As this is a small rack and it won't be bolted down to the floor it is not ideal for any extreme exercises. If you kip like a beserker or regularly throw 400 pounds or more around you might want to get a rack that is either bigger if you don't bolt it down or a smaller rack that can be bolted down to the floor. You will also have to think about where to store your plates as on the rack itself might not leave you with the best experience due to lack of space.

Alternatives to the RML 390F

The RML 390C would be an alternative to add color to your life. It has roughly the same dimensions as the flat foot and can be bolted to the ground. The price is higher, but you will get a good rack in your choice of color.

If you don't want to increase the budget and prefer to have a rack that can be bolted to the ground for extra stability the RML3 might be the right choice for you. It comes in at roughly the same price and has also less height. This might also be a better solution if you have a low ceiling.

The RM 390F is the big brother of the RML 390F. This is the monster version of this rack. If you want to build on your investment and upgrade your rack over time, this is the option for you. There will be more upgrades available for the Monster series than for the Monster Lite is Rogue focuses on the higher price tag items first to push the portfolio forward.

Overview and review of the REP fitness PR-1100 rack

This is an overview of the REP fitness PR-1100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR 1100 Rack $269

The REP PR-1100 gives you a choice of color for your low budget rack and a multi grip pull up bar. Unfortunately it strips the 1000er series of the plate storage at the back which makes it my least favorite rack out of the 1000er line. Some of the specifications are:

Height Adjustable Multi-Grip Pullup Arch
Laser Engraved Numbered Uprights
Plastic-Lined J-cups
Extended Safeties

A solid rack if you want a multi-grip bar and a rack for $300. Otherwise I personally would go for the PR-1000.

Pros of the REP PR 1100 Rack

The pros of the REP PR-1100 are:

Choice of color
Multi Grip bar

The main distinguishing parts to the other 1000er racks are the choice of color and the multi grip bar. If that is what you want, go for the 1100. Otherwise i think that the PR-1000 is the better package because of the plate storage at the back.

Cons of the REP PR 1100 Rack

Cons of the REP PR-1100 are:

No included plate storage
700lbs capacity
Imported

The PR-1100 has no included plate storage in the base configuration, which in my opinion makes it inferior to the 1000 and 1050 for the low budget market it is addressing.

With 700 lbs capacity this is not a rack for big guys who move a lot of weight regularly on awkward bar paths. If you are a seasoned strength athlete this rack is too small and flimsy and you are better off with the PR-4000 or PR-5000.

The last con is that this rack is imported from China. If you don’t care, you don’t, but if local production is important to you then REP fitness needs to be ruled out and you need to go with Rogue Fitness or Sorinex.

Alternatives to the REP PR 1100 Rack

I personally think that the PR-1000 is the better option for the same price as you will need plate storage more than a multi-grip pull up bar. That is just based on my personal experiences where flooring and storage is usually being underrated when building a home gym.

The Rogue HR2 is a solid option for a half rack from Rogue under $1000. If you want a locally produced US alternative to the REP 1000er series which is beefier than the HR2 is a great choice.

The TITAN T2 Series is one of the lowest cost racks Form the lowest cost vendor in the market. If you want to go as cheap as possible for your rack TITAN is a good address. TITAN comes with a higher risk of quality issues than the other vendors mentioned in this article.

Conclusion for the REP PR 1100 Rack

The REP 1100 rack is great if you are looking for a rack with a multi-grip bar out of the box. Otherwise, I think the other 1000 racks are a better choice for your hard-earned cash.