REP fitness PR-4100 rack vs Rogue RML 390F

This is a comparison between the Rep Fitness PR-4100 rack and the Rogue RML 390F. Follow the links for more details.

Rogue RML 390f flat foot

The Rogue RML 390F rack comes in at $795 and is one of the mid-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

What else to consider from Rogue

Overview of RML 390F

The Rogue RML 390F is an option from Rogue that does not need to be bolted to the floor. You will get a half rack for a reasonable price which can be placed anywhere from your garage, to one of the spare bedrooms or in the corner of an already established gym. It comes in black is manufactured in Columbus, Ohio.

The 390F weighs in at 295LB with a length of 48'', a width of 49'' and a height of 92.375''. Note that because of the extra beams at the bottom it is slightly higher than the average 90.375'' from Rogue. It comes with Westside Hole spacing and ships with a Single Skinny or a Fat/Skinny pull up bar, band pegs, and J Cups. The stell notes come in 3x3'' for the uprights and 2x3'' for the bases. With this rack, you are entering the Monster lite series of Rogue and the accessories available in there.

Pros of the RML 390F

This rack is easy to install and light. With this, it can be added to any kind of floor that you do not want to drill into. This can be especially beneficial when a gym already has been outfitted or your landlord does not allow for these alterations to be made. With this, you are set up and ready to go in no time, while it will also take up little space.

Cons of the RML 390F

As this is a small rack and it won't be bolted down to the floor it is not ideal for any extreme exercises. If you kip like a beserker or regularly throw 400 pounds or more around you might want to get a rack that is either bigger if you don't bolt it down or a smaller rack that can be bolted down to the floor. You will also have to think about where to store your plates as on the rack itself might not leave you with the best experience due to lack of space.

Alternatives to the RML 390F

The RML 390C would be an alternative to add color to your life. It has roughly the same dimensions as the flat foot and can be bolted to the ground. The price is higher, but you will get a good rack in your choice of color.

If you don't want to increase the budget and prefer to have a rack that can be bolted to the ground for extra stability the RML3 might be the right choice for you. It comes in at roughly the same price and has also less height. This might also be a better solution if you have a low ceiling.

The RM 390F is the big brother of the RML 390F. This is the monster version of this rack. If you want to build on your investment and upgrade your rack over time, this is the option for you. There will be more upgrades available for the Monster series than for the Monster Lite is Rogue focuses on the higher price tag items first to push the portfolio forward.

Overview and review of the REP fitness PR-4100 rack

This is an overview of the REP fitness PR-4100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-4100 Rack $429

The REP PR-4100 is the folding version of the PR-4000 rack that outbid the REP fitness rack product line. With this rack, you get two uprights, and the cross-members you need to build a rack that can be bolted to the wall with a folding mechanism. This is the ideal rack for a garage gym in which you still want to park or a floor space that should be transformed into a yoga or playroom after the use of the rack. Some of the specifications for this rack are:

Choose between 21.5" or 41" depth (from wall to the front outside of upright).
(1) pair of plastic-lined J-cups.
(1) easy-to-adjust 1.25" pull-up bar.
5/8" diameter hardware.
1" hole spacing in benching area.
2" hole spacing above and below bench area.
Uprights: 11-gauge steel, 3x3", 92" tall.
21.5" Dims: 18.5" inside length x 42.5" inside width.
41" Dims: 38" inside length x 42.5" inside width.
48.5" overall width.

This is a solid option to get a lower-cost folding rack of good quality. Especially with folding racks it nightmare sense to invest a few extra dollars as the folding action needs more attentional detail in production than a simple four post rack.

Pros of the REP PR-4100 Rack

Pros of the REP PR-4100 are:

Space efficient
Budget efficient
Reliable brand

The biggest plus of folding racks is that they can get out of the way when they are not needed anymore. If you only have one occasional user of the rack in the house O would seriously consider a folding rack.

The PR-4100 is good on your purse from two perspectives. You are getting your rack from a company that imports their products from China and you are buying a product that uses less metal than a PR-4000 or PR-5000. This makes the PR 4100 a smart buy. Especially if you are not planning on many upgrades and attachments.

Compared to Amazon resellers or TITAN fitness you will buy from a young brand that is still bending over backward to grow its customer base. You will get good, reliable service with this rack in most cases, that is why the price is a little higher than sourcing from Amazon or from TITAN.

Cons of the REP PR-4100 Rack

The cons of the REP PR-4100 are:

Limited use of attachments
Imported
Plate storage

As this is a folding rack with smaller holes on 3x3 uprights your use of attachments will be very limited. Personally, I think the most you can really get out of a folding rack is a dip station and not much else, but that is just me.

If you buy from REP Fitness your rack will be produced and packaged in China and then send to a warehouse in the US. If that rubs your patriotic streak up the wrong way you have to buy from Rogue Fitness instead and pay the extra money American Labour costs.

My biggest con for a folding rack is that you still have to come up with some solution for storing your plates as you can not do it on the rack. Unless you keep it permanently in place which defeats the purpose. There are good wall storage solutions for plates but those involve more DIY.

Alternatives to the REP PR-4100 Rack

Alternatives to the REP PR-4100 are:

The Rogue RML3WC is what comes closest out of the Rogue fitness portfolio to you the PR-4100. It has the same uprights with only slightly different drillings for the holes. Some say that the folding action on the RML3WC is a little smoother but that also hugely depends on where it is being installed and who did the job.

The TITAN X3 folding rack is TITAN’s 3x3 upright folding rack. This is the best option for a low price while still having some proper customer support with it. Other options are Amazon resellers who just stuck produce to flip it for a small

margin in bulk.

The REP SR 4000 is an alternative option if you believe in squat stands with a big base for stabilizing. I personally don’t but if you think that is a good idea the SR 4000 is excellent value for money.

Conclusion for the REP PR-4100 Rack

I personally think folding racks are a great idea for home gyms that need to co promise. If you use your garage as a mechanic/workshop in parallel or own a fancy Sunday car, this is the right option for you.