Rogue Monkey Rig vs TITAN plate loadable functional trainer

This is a comparison of the Rogue Monkey rig and the TITAN plate loadable including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN plate loadable functional trainer $749

This is an overview of the TITAN plate loadable functional trainer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview for the TITAN Plate loaded functional trainer

The TITAN plate loaded functional trainer is a great budget option to get a multi directional functional trainer into your home. Especially if you have already a rack and barbell setup at home and just not to reuse the plates for this machine. Functional trainers are great to pack a lot of exercises in one space. With this machine from TITAN you can get in your rows, vertical pulls, flyes, and even use it for deadlifts and squats. All the needed handles and accessories are included in the shipping. The full list of features includes:

- Comprehensive pulley options including lat, row, and pulldown

- Two 9 1/4” Olympic plate sleeves

- Tough steel design will last for years to come

- Pull-up bar installed at the top

- Sleek black and silver design

- Titan Fitness faceplate included

- Max user load: 390 LB

- Overall Footprint: 61” Width x 53” Depth

- Loadable Sleeve Length: 9 1/4”

- Overall height: 81”

- Side handle length: 5”

- Side handle diameter: 1”

- Row handle length: 14 1/4”

- Row grip length: 5” (each)

- Row handle diameter: 1”

- Lat pulldown handle length: 37 1/2”

- Lat pulldown grip length: 5”

- Lat pulldown handle diameter: 1”

This is a great budget option for a functional trainer for home gym use. In a commercial setting there might be too many moving parts.

Pros of the TITAN Plate loaded functional trainer

Pros of the TITAN plate loaded functional trainer are:

Price
Multi purpose training
Exercises per square foot

The best thing about the TITAN plate loaded functional trainer is the low price. Functional trainers can cost up to $5000 depending on the make, quality, and mechanics used. With this you can have an entire gym in your basement for $700 assuming you already own plates. If you do not a set of TITAN plates can be had for $375. TITAN is already budget orientated as a manufacturer and this is a budget design. If you are strapped for cash, this is a good investment.

The pulley system on this functional trainer works in many directions. You can pull up, down, and also use the machine for horizontal pulls. You get everything you need to build muscle and build an attractive physique. It goes above and beyond home trainers that only use your body weight as you can use the plates to continuously get stronger.

If you look at how many exercises you can do in small space, this machine is also great. It takes up the same space as a leg press machine, but you can do so many more exercises on it. This makes it a good choice for rehab centers, yoga instructors and other lifestyle and health out fits that want to add some gentle strength training to their services.

Cons of the TITAN Plate loaded functional trainer

The cons of the TITAN plate loaded functional trainer are:

Plate loaded
Makeshift
Many moving parts

The fact that the plate loaded functional trainer is plate loaded makes it cheaper, but also means that you have to have plates and storage for them first. Also handling the plates can be a pain, as you need to fit them onto the pins and get them off. If you like to "run the rack" in your exercises, this machine is more of a pain than a gain. The many plates can also be a hindrance when you are working with a client and create a trip hazard.

The hole construction has a bit of a makeshift feel about it. This is often the case when the exercise machine is majorly a combination of pulley which have been connected on a frame. That is the entire idea of this machine, but it doesn't make it something that I want to use on a regular basis. If you are not strapped for cash, you might want to opt for the functional trainer from TITAN that includes to weight stacks. If your commercial gym wants to convey a slick and hip image to your clients this might also not be the right choice. This model screams iron den.

The many moving parts also make the assembly of the TITAN plate loaded functional trainer complex. TITA is known for bad manuals and occasional missing out in small parts in the shipping. If you are missing a small part in your shipment it is next to impossible to source it separately from the vendor. You will either end up with more big parts to just get one small part or at your local DIY store.

Alternatives to the TITAN Plate loaded functional trainer

Alternatives to the plate loaded functional trainer are:

The TITAN functional trainer is the big brother of the plate loaded functional trainer. It ships with two 200lbs weight stacks. While these can have their own challenges, this is the cleaner and more stable installation once it is set up. If you buy a functional trainer as an addition to a health/spa or yoga gym, this is the better choice. This is also the better choice in a gym with high footfall as it creates fewer opportunities to break the machine while loading the plates. The only disadvantage is that you have to fork out about $1300 more to get this version of the functional trainer.

The TITAN lat tower is a great addition to any home gym that means business. Usually you will already have a couple of kettlebells, dumbbells, and a rack with plates and a barbell before considering this. As a second purchase to add a sizable machine to your home gym the lat tower is a better choice than the plate load able functional trainer. The quality of the pulleys is better, you can load it with up to 300lbs, and it will provide a weight stack to your for a different form of training for you.

The TITAN hack squat leg press is also slightly more expensive, but provides a good focus on your legs. If you have the space and prefer dedicated machines over multi functional machines in your training, than you can consider the hack squat leg press machine as a 2 in 1 for your home gym. For commercial gyms this is not necessarily the best option as 2 for 1 always means you need more instructions for the machine or higher injury risk due to using it incorrectly.

Conclusion for the TITAN Plate loaded functional trainer

The TITAN plate loaded functional trainer is a great solution for a dorm basement where everyone chips in. Especially if there are already some plates available. If you are building a garage gym in your home and you have the spare change I would lean more towards the TITAN functional trainer or the lat tower as an addition to your already existing rack or as a training station for the entire family.

Overview and Review of the Monster Lite Monkey Rig

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monkey Lite rig is a gym in its own for advanced athletes. See the details in this article.

Overview of the Monkey Rig

The Rogue Monster Lite Monkey Rig is an impressive piece of hardware which will catch the eye of anyone who will cast an eye on it. The main addition to the normal Rogue setups are the Monkey bars at various heights. If you want to prepare your athletes for CrossFit competitions or to compete in the Ninja warrior series, this is the way to go.

The monkey rig is constructed by 3x3 11- Gauge steel with 0.625 holes and Westside spacing. Its length is 24', width 6' and height 9'. This makes for a total footprint of 24'-3'' x 6'-8''. On this space, you will create 6 squat/bench stations and more than 10 pull up stations. It comes in black and ships in 6-8 weeks.

Be aware that it does not ship with barbells or plates when you purchase it. These are additions to your budget. You can read up on my blog if you are not sure yet which rogue barbell to buy. to get an overview of the portfolio.

Pros of the Monkey Rig

The Monster lite Monkey Rig makes a big statement. If you want to differentiate yourself from other CrossFit boxes in an area where you have a lot of fit people around it makes sense. If your clients are also collectively moving into a direction where they want to compete in CrossFit team sports, this is a good bet. It will also open your gym up to clients who are more interested in climbing.

In addition to the Monkey bars, you will also get a fully functioning 24' Monster Lite Pull-up rig. This is already a full gym. It is ideally suited to training which incorporates a lot of kipping pull-ups and muscle ups. The middle also creates a corridor which can be used for sprints and other aerobic ideas like bear crawls.

Cons of the Monkey rig

This thing is massive! Most gyms will not have enough space. If I was to open a gym I would think of the Monster lite Monkey Rig as something to aspire to rather than a first purchase. Most of your clients will not be able to do pull-ups, muscle-ups or climb the entire Rig. This is something that the fitness community you will build has to grow into. The 5.000$ might be invested more wisely in other equipment in a first purchase unless you have unlimited sources, space and want to build the most impressive gym in the entire city (which is also a valid business strategy, if you have good financial backing).

It is a pity that you can not get the monkey rig in individual colors and that there is no conversion kit available at the moment for already existing 24' rigs. Also be aware that the Monster Lite series is not compatible with all of the Rogue accessory. Think about what additional equipment you want to get before you hit the purchase button. In my opinion, it also does not make sense to have beams at the lower end of this setup. Therefore you will not be able to use band pegs for the squat/bench stations. You will also have to store the weight plates away from the rig. To protect your clients from injury you want to take special care that this setup is not cluttered with plates.

How many clients should this rig bring you?

If you think the Monkey Rig can attract 17 new clients which you can sign up for 50$ a month on a 1-year retainer, make the purchase. This equals net new revenue of 10.200$ against 5.000$ in the first year. Adjust the numbers for your own gym accordingly.

Alternatives to the monkey rig

Depending on which clients you serve and how much floor space you have here some alternatives from Rogue based on a 5K budget excluding barbells and plates:

1x Monster Lite rig 24' @ 3595$
1x Metal Jerk Blocks @ 1.150$

This configuration will give you more opportunities to generate revenue from beginning weightlifters and gives you some color options.

2x RM6 @ 2095 each
2x Monster Single Post Shelf @ 95$ each
2x Monster Single Post Kettlebell Shelf

This configuration will give you more options in terms of training styles, especially when most of your clients cannot do pull-ups yet. This configuration leans more towards a powerlifting gym or an upgrade of the free weight section of a commercial gym. The Single Post shelves are often overlooked when buying the 6er series of Rogue. If your clients are used to half racks you can leave the back free. More often than not new additions to the Rogue portfolio are made exclusively or earlier available to the Monster range and not to the Monster lite range. Keep that in mind when making your investment.

Conclusion

The monkey rig is a great piece of equipment if you have space and money to afford it. It is the right addition to your gym, if you have advanced athletes who are looking for a bigger challenge. If your gym mainly has recreational weekend warriors on the roster this beast of steel and bars might be a little too intimidating.