Rogue RM 390F Flat Foot Monster Rack vs TITAN Glute and Hamstring developer

This is a comparison between the Rogue RM 390F Flat foot rack and the TITAN Glute and Hamstring Developer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Glute and Hamstring developer $414

This is an overview of the TITAN Glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN Glute and hamstring developer

The TITAN Glute and hamstring developer is a clone of the similar product from Rogue, but for about half the price. A glute and hamstring developer helps with attacking the lower back and hamstring in a way that is only hard to do with usual machines and free weights. On this the TITAN GHD delivers with minor subtractions for product quality. The full specifications of the TITAN GHD are:

- Wide adjustment range

- Extra large pads for comfort

- Heavy-Duty steel construction

- Wide base to eliminate tipping

- Includes wheels for mobility or storage

- Height: 41-in.

- Width: 45.5-in.

- Length: 70-in.

- Weight Capacity: 350 lb.

- Product Weight: 190 lb.

- Packaging: 2 boxes

This is a good addition for a home gym with extra space or a commercial gym for athletes and strength focused clients. Be preapred that this machine will need some instructions to be used properly, if you put it in a public space as it is not as straightforward to use as other machines you will find in commercial gym.

Pros of the TITAN Glute and hamstring developer

The pros of the TITAN GHD are:

Price
Build

This machine does what it says on the tin for half the price. It is build like a tank and if you are the only one using it you also do not have to worry about the minor design flaws this machine has compared to the Rogue GHD. If you want to save money for your home gym and at the same time train the heck out of your posterior chain than this is the weapon of choice.

Cons of the TITAN Glute and hamstring developer

The cons of the TITAN Glute and hamstring developer are:

Space requirements
Adjusting the machine
Reverse hyper not included

One big point against the TITAN GHD is the space requirement. In addition to the big footprint you also have to factor in that you will be hanging out of the construction to do the exercise. This makes it an unusable solution in many small spaces which barely fit a rack.

TITAN did not fully think through how to adjust this machine for multiple users. In a home gym scenario this is irrelevant and you can just take the savings made compared to the Rogue GHD. If you run a commercial gym and expect the machine to be adjusted often for several users, than you might want to go for their machine as the mechanics work easier.

TITAN also has machines in their portofolio which are a GHD and reverse hyper in one. If you want to save money and space I would encourage you to look into these options before making your final purchase decision. Especially if you have limited space.

Alternatives to the TITAN Glute and hamstring developer

Alternatives to the Glute and Hamstring developer are:

The TITAN H-PND was the first go from TITAN at a reverse hyper. This machine is heavily overbuilt and therefore great for very big individuals who have the space for a dedicated Reverse hyper machine. If you have multiple athletes that want to move tons of weights on a reverse hyper this is the one for you.

The TITAN Economy H-PND is a budget optimized version of the Original reverse Hyper from TITAN. To put a lower price tag on it it has been shrunk on most aspects. It has a smaller pad and the steel it is built of is thinner. It is still a massive machine that can be used by most average joes. If your gym is swarmed by individuals the size of MIke O Hearn, Stan Efferding, and Brian Shaw, you might want to go for the H-PND instead.

The TITAN Glute and Hamstring combo is a GHD and reverse hyper combo based on the design of the Economy H-PND. This is a great machine for a spacious home gym that wants to have a reverse hyper and a GHD.

Conclusion for the TITAN Glute and Hamstring developer

If you have a commercial gym that fits a reverse hyper and a GHD, the Titan Glute and hamstring developer is a great option. in a home gym i would definitely also look at the Glute and hamstring combo if I have already identified the need for a GHD to kill two birds with one stone. The space you save could be used against a belt squat machine.

Overview and review of the Rogue RM 390F Flat Foot Monster Rack

Please also note that there is a Monster ltie and monster version of the flat foot rack in the Rogue line up. This video explains the differences very well:

Price: 1.211

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster Flat Foot will save you bolting down the rack. You will have no holes in the floor with this one. See the details in this article.

Overview of the RM 390F Flat foot

The RM390F rack is a special rack in the Rogue Line up. IT is one of two racks with the flat foot design. The flat foot design makes it possible that you do not have to drill the rack into the ground to anchor it. This makes the flat foot a very popular option in scenarios where a wood, carpet or rubber floor have already been installed and should not be damaged.

The Flat Foot weighs 335LB and comes in with a width of 24''. It is 93'' high and therefore has a footprint of 54''x'50''. The flat foot is compatible with the accessories of the Monster series. The only thing to consider is that Band pegs and safety spotter arms should not be used with the Flat Foot Monster rack. Get safety pins instead.

How many clients should the Rogue RM390F bring you?

If you think that the Rogue RM390F will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.211$. Adjust the numbers for your own gym accordingly.

Pros of the 390F Flat foot

The biggest pro of this rack is the flat foot design. This means you can install this rack anywhere where there is space. No nasty holes in the floor which need to be refilled once you want to move the rack somewhere else.

Cons of the 390F Flat foot

If you get a half rack you have to think about where to store your plates. In addition, not everyone likes to train in a half rack. IT can be a bit tight for a three-step walk out.

Alternatives to the 390F Flat foot

For the same budget of 1.211$ you have the following alternatives with Rogue:

1x RML 390F Monster Lite @795$

The Rogue RML 390F is the Monster Lite version of the flat foot design. This is a very viable option to save about 500$. You are already in the market for a solution with a small footprint for home use and small athletes. You might as well save a bit more money by going for the slightly less sturdy construction of the same product.

1x Rogue Froning RML 4100C Power rack @1.150$

If you want a full rack that gets you close to the champions this is the rack to go for. Think of the fittest man on earth while training to set new PRs in a full rack dedicated to the greatest CrossFitter of all time.

Conclusion

The 390F Flat foot is a great half rack to use at home which does not need to be bolted down. With this you can train and move whenever it is convenient.