Rogue RM6 rack vs TITAN Glute and hamstring developer

This is a comparison between the Rogue RM6 rack and the TITAN Glute and hamstring developer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Glute and Hamstring developer $414

This is an overview of the TITAN Glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN Glute and hamstring developer

The TITAN Glute and hamstring developer is a clone of the similar product from Rogue, but for about half the price. A glute and hamstring developer helps with attacking the lower back and hamstring in a way that is only hard to do with usual machines and free weights. On this the TITAN GHD delivers with minor subtractions for product quality. The full specifications of the TITAN GHD are:

- Wide adjustment range

- Extra large pads for comfort

- Heavy-Duty steel construction

- Wide base to eliminate tipping

- Includes wheels for mobility or storage

- Height: 41-in.

- Width: 45.5-in.

- Length: 70-in.

- Weight Capacity: 350 lb.

- Product Weight: 190 lb.

- Packaging: 2 boxes

This is a good addition for a home gym with extra space or a commercial gym for athletes and strength focused clients. Be preapred that this machine will need some instructions to be used properly, if you put it in a public space as it is not as straightforward to use as other machines you will find in commercial gym.

Pros of the TITAN Glute and hamstring developer

The pros of the TITAN GHD are:

Price
Build

This machine does what it says on the tin for half the price. It is build like a tank and if you are the only one using it you also do not have to worry about the minor design flaws this machine has compared to the Rogue GHD. If you want to save money for your home gym and at the same time train the heck out of your posterior chain than this is the weapon of choice.

Cons of the TITAN Glute and hamstring developer

The cons of the TITAN Glute and hamstring developer are:

Space requirements
Adjusting the machine
Reverse hyper not included

One big point against the TITAN GHD is the space requirement. In addition to the big footprint you also have to factor in that you will be hanging out of the construction to do the exercise. This makes it an unusable solution in many small spaces which barely fit a rack.

TITAN did not fully think through how to adjust this machine for multiple users. In a home gym scenario this is irrelevant and you can just take the savings made compared to the Rogue GHD. If you run a commercial gym and expect the machine to be adjusted often for several users, than you might want to go for their machine as the mechanics work easier.

TITAN also has machines in their portofolio which are a GHD and reverse hyper in one. If you want to save money and space I would encourage you to look into these options before making your final purchase decision. Especially if you have limited space.

Alternatives to the TITAN Glute and hamstring developer

Alternatives to the Glute and Hamstring developer are:

The TITAN H-PND was the first go from TITAN at a reverse hyper. This machine is heavily overbuilt and therefore great for very big individuals who have the space for a dedicated Reverse hyper machine. If you have multiple athletes that want to move tons of weights on a reverse hyper this is the one for you.

The TITAN Economy H-PND is a budget optimized version of the Original reverse Hyper from TITAN. To put a lower price tag on it it has been shrunk on most aspects. It has a smaller pad and the steel it is built of is thinner. It is still a massive machine that can be used by most average joes. If your gym is swarmed by individuals the size of MIke O Hearn, Stan Efferding, and Brian Shaw, you might want to go for the H-PND instead.

The TITAN Glute and Hamstring combo is a GHD and reverse hyper combo based on the design of the Economy H-PND. This is a great machine for a spacious home gym that wants to have a reverse hyper and a GHD.

Conclusion for the TITAN Glute and Hamstring developer

If you have a commercial gym that fits a reverse hyper and a GHD, the Titan Glute and hamstring developer is a great option. in a home gym i would definitely also look at the Glute and hamstring combo if I have already identified the need for a GHD to kill two birds with one stone. The space you save could be used against a belt squat machine.

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

Overview of the Rogue RM6

The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.

The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:

Bright blue
Bright Green
Burnt Orange
Dark Blue
Dark Red
Gun Metal
Light Gray
Rogue Red
White
Satin Clear
Satin Black (Standard)

All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue.

How many clients should the RM6 bring you?

If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.

Pros of the Rogue RM6

This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.

Cons of the Rogue RM6

A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.

Alternatives to the Rogue RM6

Based on this budget here are some alternatives you might want to consider to the RM6:

1x RM4 1.300$ to 2.000$

If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.

1. RML-690C 1.750$ - 2.350$

The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.