Rogue RM6 rack vs TITAN plate loadable functional trainer

This is a comparison between the Rogue RM6 rack and the TITAN plate loadable functional trainer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN plate loadable functional trainer $749

This is an overview of the TITAN plate loadable functional trainer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview for the TITAN Plate loaded functional trainer

The TITAN plate loaded functional trainer is a great budget option to get a multi directional functional trainer into your home. Especially if you have already a rack and barbell setup at home and just not to reuse the plates for this machine. Functional trainers are great to pack a lot of exercises in one space. With this machine from TITAN you can get in your rows, vertical pulls, flyes, and even use it for deadlifts and squats. All the needed handles and accessories are included in the shipping. The full list of features includes:

- Comprehensive pulley options including lat, row, and pulldown

- Two 9 1/4” Olympic plate sleeves

- Tough steel design will last for years to come

- Pull-up bar installed at the top

- Sleek black and silver design

- Titan Fitness faceplate included

- Max user load: 390 LB

- Overall Footprint: 61” Width x 53” Depth

- Loadable Sleeve Length: 9 1/4”

- Overall height: 81”

- Side handle length: 5”

- Side handle diameter: 1”

- Row handle length: 14 1/4”

- Row grip length: 5” (each)

- Row handle diameter: 1”

- Lat pulldown handle length: 37 1/2”

- Lat pulldown grip length: 5”

- Lat pulldown handle diameter: 1”

This is a great budget option for a functional trainer for home gym use. In a commercial setting there might be too many moving parts.

Pros of the TITAN Plate loaded functional trainer

Pros of the TITAN plate loaded functional trainer are:

Price
Multi purpose training
Exercises per square foot

The best thing about the TITAN plate loaded functional trainer is the low price. Functional trainers can cost up to $5000 depending on the make, quality, and mechanics used. With this you can have an entire gym in your basement for $700 assuming you already own plates. If you do not a set of TITAN plates can be had for $375. TITAN is already budget orientated as a manufacturer and this is a budget design. If you are strapped for cash, this is a good investment.

The pulley system on this functional trainer works in many directions. You can pull up, down, and also use the machine for horizontal pulls. You get everything you need to build muscle and build an attractive physique. It goes above and beyond home trainers that only use your body weight as you can use the plates to continuously get stronger.

If you look at how many exercises you can do in small space, this machine is also great. It takes up the same space as a leg press machine, but you can do so many more exercises on it. This makes it a good choice for rehab centers, yoga instructors and other lifestyle and health out fits that want to add some gentle strength training to their services.

Cons of the TITAN Plate loaded functional trainer

The cons of the TITAN plate loaded functional trainer are:

Plate loaded
Makeshift
Many moving parts

The fact that the plate loaded functional trainer is plate loaded makes it cheaper, but also means that you have to have plates and storage for them first. Also handling the plates can be a pain, as you need to fit them onto the pins and get them off. If you like to "run the rack" in your exercises, this machine is more of a pain than a gain. The many plates can also be a hindrance when you are working with a client and create a trip hazard.

The hole construction has a bit of a makeshift feel about it. This is often the case when the exercise machine is majorly a combination of pulley which have been connected on a frame. That is the entire idea of this machine, but it doesn't make it something that I want to use on a regular basis. If you are not strapped for cash, you might want to opt for the functional trainer from TITAN that includes to weight stacks. If your commercial gym wants to convey a slick and hip image to your clients this might also not be the right choice. This model screams iron den.

The many moving parts also make the assembly of the TITAN plate loaded functional trainer complex. TITA is known for bad manuals and occasional missing out in small parts in the shipping. If you are missing a small part in your shipment it is next to impossible to source it separately from the vendor. You will either end up with more big parts to just get one small part or at your local DIY store.

Alternatives to the TITAN Plate loaded functional trainer

Alternatives to the plate loaded functional trainer are:

The TITAN functional trainer is the big brother of the plate loaded functional trainer. It ships with two 200lbs weight stacks. While these can have their own challenges, this is the cleaner and more stable installation once it is set up. If you buy a functional trainer as an addition to a health/spa or yoga gym, this is the better choice. This is also the better choice in a gym with high footfall as it creates fewer opportunities to break the machine while loading the plates. The only disadvantage is that you have to fork out about $1300 more to get this version of the functional trainer.

The TITAN lat tower is a great addition to any home gym that means business. Usually you will already have a couple of kettlebells, dumbbells, and a rack with plates and a barbell before considering this. As a second purchase to add a sizable machine to your home gym the lat tower is a better choice than the plate load able functional trainer. The quality of the pulleys is better, you can load it with up to 300lbs, and it will provide a weight stack to your for a different form of training for you.

The TITAN hack squat leg press is also slightly more expensive, but provides a good focus on your legs. If you have the space and prefer dedicated machines over multi functional machines in your training, than you can consider the hack squat leg press machine as a 2 in 1 for your home gym. For commercial gyms this is not necessarily the best option as 2 for 1 always means you need more instructions for the machine or higher injury risk due to using it incorrectly.

Conclusion for the TITAN Plate loaded functional trainer

The TITAN plate loaded functional trainer is a great solution for a dorm basement where everyone chips in. Especially if there are already some plates available. If you are building a garage gym in your home and you have the spare change I would lean more towards the TITAN functional trainer or the lat tower as an addition to your already existing rack or as a training station for the entire family.

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

Overview of the Rogue RM6

The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.

The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:

Bright blue
Bright Green
Burnt Orange
Dark Blue
Dark Red
Gun Metal
Light Gray
Rogue Red
White
Satin Clear
Satin Black (Standard)

All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue.

How many clients should the RM6 bring you?

If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.

Pros of the Rogue RM6

This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.

Cons of the Rogue RM6

A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.

Alternatives to the Rogue RM6

Based on this budget here are some alternatives you might want to consider to the RM6:

1x RM4 1.300$ to 2.000$

If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.

1. RML-690C 1.750$ - 2.350$

The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.