Rogue RM6 rack vs TITAN plate loaded chest press

This is a comparison between the Rogue RM6 rack and the TITAN plate loaded chest press including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN plate loaded chest press $464

This is an overview of the TITAN plate loaded chest press including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN plate loaded chest press machine

The TITAN plate loaded chest press machine is a chest press machine with a foldable bench which makes it unique. Again TITAN designs a machine with the spacious home gym in mind that saves money and space. The plate loadable chest press can be used with regular Olympic plates. The bench is adjustable for incline presses and has multiple grip variations. The full specifications of this TITAN machine are:

- Fits Olympic plates and features (2) 9.5-inch loadable weight posts

- Fully adjustable bench for the incline or flat reps

- (13) Bench depth positions to easily adjust to any size athlete and to accommodate hand placement for presses

- (5) Lifting arm positions to easily adjust the angle of your lift

- Bench easily stores on top of the frame when not in use to

- Minimum Footprint: 64-in. W x 63-in. L

- Maximum Footprint: 64-in. W-in. x 23-in.

- Seat Pad Dimensions: 11 - 8-in. x 12.5-in.

- Lifting Arm Length: 34-in.

- Vertical Handle Spread: 26.5-in.

- Weight Post Length: 9.5-in.

- Weight Capacity: 1,000 lb.

- Weight: 155 lb.

This is a great machine for bench presses and replacing a dumbbell rack, if you have the space for it.

Pros of the TITAN plate loaded chest press machine

The pros of the TITAN plate loaded chest press machine are:

Multiple grip variations
Foldable bench
Plate loaded
Price

Compared to a barbell, rack and bench setup this machine provides you more grip variations. This could also be done with dumbbells and a rack, but then you have to factor in the storage space for multiple dumbbells and that they are awkward to work with by yourself once it gets heavy.

The foldable bench saves some space when you want to free up the center of your gym for stretching exercises, runs or other stout ones which need space. The footprint gets smaller, but you still have the metal frame to consider.

Plate loaded machines are great for home gyms as you can use one set of plates for all the machines you own. This saves cost in getting your little park of machines together as you not pay the weight stack for each and every machine.

As with all TITAN products you will have a hard time to find something that is priced better. Especially as this machine already includes an adjustable bench which already can easily cost $500 or more by themselves.

Cons of the TITAN plate loaded chest press machine

The cons of the TITAN plate loaded chest press are:

Plate loaded
Space requirements
Bench is attached

While plate loaded designs can be great in smaller gyms it can turn into a trip hazard and bottlenecks in high frequency commercial gyms. If you have a lot of footfall with a varying level of experience combined with little supervision, than go for a chest press machine with an included weigh my stack.

If your home gym is very crammed you might not have the space to get another machine in like the Titan plate loaded chest press. In this scenario you might want to get three pairs of dumbbells (light, middle, heavy) and spotter arms for dumbbells for your rack. This makes the setup more modular.

A further disadvantage of the TITAN plate loaded chest press is that the be cj is attached. This means that you can not move things around in your and might even need to get a second bench for that purpose. Just keep that in mind based on the plans you have for your gym and the exercises you want to do.

Alternatives to the TITAN plate loaded chest press machine

Alternatives to the TITAN plate loaded chest press are:

The Titan functional and plate loaded functional trainer can also be used as bench press stations as long as you get an additional bench. With the different grips you can have more variety than with a barbell. These two machines have $1300 between them. In a home gym scenario you might want to use the plate loaded version to save considerably.

Conclusion for the TITAN plate loaded chest press machine

The TITAN plate loaded chest press machine is a serious consideration to get instead of a full rack of dumbbells. If you have the space for a full rack of dumbbells you can most likely also fit this machine. You can do all of the dumbbell exercises you need with this machine and load it with plates instead. For a home gym this is a definite alternative. In a commercial setting you can not replace a dumbbell rack with this machine as you have to cover more people at the same time. It can however be used to make the bench press more accessible toi wider community of your clients.

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

Overview of the Rogue RM6

The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.

The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:

Bright blue
Bright Green
Burnt Orange
Dark Blue
Dark Red
Gun Metal
Light Gray
Rogue Red
White
Satin Clear
Satin Black (Standard)

All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue.

How many clients should the RM6 bring you?

If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.

Pros of the Rogue RM6

This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.

Cons of the Rogue RM6

A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.

Alternatives to the Rogue RM6

Based on this budget here are some alternatives you might want to consider to the RM6:

1x RM4 1.300$ to 2.000$

If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.

1. RML-690C 1.750$ - 2.350$

The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.