Rogue RM6 rack vs TITAN vertical leg press

This is a comparison between the Rogue RM6 rack and the TITAN vertical leg press including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Vertical leg press $349

This is an overview of the TITAN vertical leg press including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN vertical leg press

The vertical leg press is a low budget approach on a barbell squat or leg press machine. IT uses two uprights to and three plate pins to deliver something similar to the classic leg press machine you see in every gym. It also has a smaller footprint than most other machines which train the legs. The full specifications of the TITAN vertical leg press are:

- Takes the stress off of your back and isolates your lower body.

- Three weight posts for plenty of room to add weight.

- Adjustable footplate starting height to suite different size athletes.

- High quality steel construction and pads for a solid, comfortable design.

- Dual post design lets you feel the weight on either leg.

- Footprint: 48" x 38"

- Footplate Starting Height(s): 26.5", 32", 35", 38".

- Full Extension Height: 52.5"

- Footplate Dimensions: 21.5" x 5"

- Back Pad Dimensions: 32" x 15"

- Head Rest Dimensions: 10" x 6"

- Weight Post Length: 8.75"

- Weight Post Diameter: 1.95"

- Weight Capacity: 400 LB

- Weight: 94 LB

This is a great machine if you want to save some space and money. It has its little flaws and I would not recommend it if you are massive yourself.

Pros of the TITAN vertical leg press

The pros of the TITAN vertical leg press are:

Small foot print
Small price
Easy to transport

This leg press does not cost much and also saves space in your gym. For any home gym that is pressed for space this can be a good solution to still get a leg press into a crammed space. If you take it apart there is also not a lot to transport. This makes it a good option for someone who moves around a lot and wants to take their gym with them.

Cons of the TITAN vertical leg press

The cons of the TITAN vertical leg press are:

Small footplate
Small area to lie on
No security pin

This machine has all kinds of issues of you are the type of person that leg presses several hundred kilos of plates. Even though the position is less advantageous than in other leg presses, the small design without any security stops can be scary. I would not recommend this machine to anyone who already barbell back squats north of 150kg for repetitions as this machine has too many options to harm yourself in a serious way if the weight is too heavy.

Alternatives to the TITAN vertical leg press

The TITAN smith machine is another option in the TITAN portfolio to do squats and other exercises. While this machine comes in at a much higher price than the vertical leg press, you can also store plates on it and do more than just squats. I am personally not a huge fan of smith machines as I think that a rack with a barbell does the job better and safer once you learned how to use it properly.

The titan hack leg press is a good option for a home gym with a bit of space as it doubles up as two machines. The design is also closer to the common leg press machines which you see all over the world. While it is still a bit flimsy compared to other leg presses in the market, i would recommend it over the vertical leg press, if you have the space for it.

If you are considering a leg press machine mainly to get more squat volume in, than a TITAN belt squat machine might be the better option for you. This machine also puts less pressure on your spine than a regular barbell squat, but you are still standing on your won feet rather than laying on the ground. This is a great option for anyone who want s to blow their quads.

The Rogue Rhino is the current gold standard in the fitness industry for belt squat machines. This is the best you can get in terms of build and functionality if you want to get a leg machine. That also comes with a bigger price tag as the Rogue Rhino is very close to the $2000 mark which plays in a completely different league than the TITAN vertical leg press.

The Rogue leg press is a $4000 dollar monster of a leg press machine that even Ronnie Coleman could not break. In addition to the large weight capacity and the amount of metal you would need to build a car it also offers the option to train each leg separately. The footplate can be unlocked in the middle and each platform runs on its own lever system.

Conclusion for the TITAN Vertical leg press

The TITAN vertical leg press is a good machine for a crammed space at home to get a leg press. Be careful when you use and do not load it up too much. It only weighs 94lbs so you might not want to put 1000lbs on top of it when all that separates you and the floor is your legs.

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

Overview of the Rogue RM6

The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.

The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:

Bright blue
Bright Green
Burnt Orange
Dark Blue
Dark Red
Gun Metal
Light Gray
Rogue Red
White
Satin Clear
Satin Black (Standard)

All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue.

How many clients should the RM6 bring you?

If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.

Pros of the Rogue RM6

This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.

Cons of the Rogue RM6

A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.

Alternatives to the Rogue RM6

Based on this budget here are some alternatives you might want to consider to the RM6:

1x RM4 1.300$ to 2.000$

If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.

1. RML-690C 1.750$ - 2.350$

The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle