REP fitness AB-5000 bench vs Reflex military bench

This is a comparison between the Rep Fitness AB-5000 bench and the Reflex MIlitary bench. Follow the links for more details.

Overview and review of the Reflex Olympic Military bench

The Reflex Olympic Military bench comes in at $1.905 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Most popular Rogue bench

This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020.

These were the most popular rogue benches on Marathon-CrossFit.com in 2020. The rankings were as followed:

The Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the AB2. You can read the full review of the AB3 by following this link.

The Rogue AB2 is the little brother of the AB3. It is the same bench except that it is missing the mechanics to do decline benches. This makes it the best value for money bench from Rogue in my opinion. You can read the full review of the AB2 via this link.

The Rogue west side bench 2.0 is the bench of choice if you weigh more than 120kg and you are a huge fan of the west side method. In my opinion, you can get no bench which is as sturdy at this price point. This bench allows for all the band variations you can dream of and can take a 1000 pound bench press as long as you bolt it to the ground. If you are not a monster, this might be a little overkill. You can read the full review of the Rogue Westside bench 2.0 by following this link.

The Rogue adjustable bench 2.0 is a cheaper design than the AB2 which does the same thing. I personally prefer the pin and lock system of the AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the Rogue adjustable bench 2.0 via this link.

The rogue combo rack could also be listed under racks. I chose to list it under benches because if you buy this instead of a power rack, you buy it for the competition bench and not for the squat stand. Compared to other combo racks in the market the price is decent and you will get a high-quality combo rack. It is not recommended if you are not already an experienced lifter. You can read the full review of the Rogue combo via this link.

Overview of the Reflex Military bench

The reflex Olympic military bench is a solid bench to securely do your seated military bench presses. This is a big piece of metal which will never break on you. No matter how big your athletes and the weights they will move, the reflex will not go anywhere. If you have problems with shifting benches based on your floor or the sheer size of your athletes than the reflex is the solution. The specifications of the Reflex military bench are:

Combination of 3×3 11ga. & 3/16-walled fully Tubular steel construction.
Powder Coated finish.
Plastic lined weight bar saddles.
Aluminum Spotter Deck.
Adjustable Saddles w/ 11 positions.
Weight storage.
7 position adjustable safeties.
Weight storage.
1in high-density foam pad.
Product weight 155 - 465LB
Length 38”-54.5”
Width 48”
Height 58” - 74.5”

As long as you have the floor space and very big athletes, the Reflex military bench is the right solution for you.

Pros of the Reflex Military bench

With the Reflex bench, you have the same set up for your military press each time you or your athletes step into the machine. With the weight of the machine, your athletes will be secure no matter how big the challenge. This is a great machine for a serious gym that reminds of the golden days of bodybuilding.

Cons of the Reflex Military bench

The Reflex military bench takes up quite a bit of floor space and is pretty limited in its applications. This makes it not an ideal option for home gyms or group class environments with changing demands.

Alternatives to the Reflex Military bench

Alternatives to the Reflex Olympic military bench are

The reflex decline bench tailors to the same idea as the military press machine. The decline bench press is a machine where you would need more security as for a military press. Therefore your money might be placed here unless you have a lot of bodybuilders in your gym or just like big things.

The reflex incline bench press has a fixed bench for incline bench presses. This makes a more secure setup as with a free-standing bench. This comes at a higher cost and a bigger need for floor space.

The Rogue AB3 bench would give you the option to move below $1000 while still being able to move the bench and allow for different setups. This is the only bench from Rogue which can also be used for decline bench presses.

Summary of the Reflex Military bench

The Reflex military bench will help with security and the same set up for military presses. If you want to move big weights on the seated military press this is the machine for you. Especially if you considered the ISO leg press you might want to consider the reflex range to make your budget stretch further.

Overview and review of the REP fitness AB-5000 bench

This is an overview of the REP fitness AB-5000 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

REP AB-5000 Adjustable Bench zero-gap

The REP AB-5000 bench is the zero-gap bench option from REP fitness. The lower part of this bench can be moved in place so that the gap disappears. This is a great bench for very lifters who still want an adjustable bench to move around but no gap when flat benching. The full specifications of this bench are:

Patented: This product was designed by REP in the USA and protected by one or more issued patents.
11-gauge steel frame.
Flat, incline, and decline positions with 7 back pad adjustments and 4 seat pad adjustments.
Laser-cut degree markings on a stainless steel wear guard
Unique pop-pin and bearing system adjustment for zero gap between seat and back pad. Adjusts in 1 second.
Easy to move with urethane grip handle and wheels

Total Height: 17.75"
Total Pad Length: 53.5"
Back Pad Width: 12.25"
Total Footprint: 8 SQFT
Weight Capacity: 1,000 lb
3% Tolerance

This is a solid option at the higher price range of REP fitness bench portfolio of like the pin design and want no gap between the two pads of the bench.

Pros of the REP AB-5000 Adjustable Bench

The pros of the REP AB-5000 bench are:

Zero gap
Good inside the rack bench
Harder cushion
Longer seat
Labeled degrees
A HIgher degree of safety due to push pins

The main feature of this bench is the zero-gap design. This makes it a good bench to keep inside your rack as it is not as easy to adjust as other benches in the REP fitness lineup.

It also comes with a harder cushion than some of the other REP fitness options and a longer seat than the REP AB-5200.

The labeled degrees on this bench are one of the biggest distinguishing features of the REP fitness compared to the competition. If I was a designer at someone else’s company I would probably copy it.

Cons of the REP AB-5000 Adjustable Bench

Cons of the REP AB-5000 are:

Cumbersome to adjust
Heavy
Vertical instead of a horizontal handle
90-degree incline

This is a big and hard-to-adjust bench. What you can in options for the setup you lose in speed for the adjustment itself. I also don’t like the 90 degrees top spot and prefer the 85-degree option in the REP AB-5200. The vertical handle to move the bench is also not of its time anymore as horizontal handles are easier to use.

Alternatives to the REP AB-5000 Adjustable Bench

Alternatives to the REP AB-5000 are

The REP AB-5200 bench is the better option if you don’t mind a little gap in your bench while gaining a lot more comfort in adjusting it. I am personally not a huge fan of the safety pin design on adjustable benches as it is a pain to use. The hook system is more dangerous for your fingers but has greater ease of use.

The Rogue AB2 adjustable bench works with the push pin design and can also be upgraded to the AB 3 by buying a leg attachment. These are the sturdiest benches you can get from one of the best vendors in the market. Their price is off-putting. The range close to $1000. At TITAN fitness you can build an entire gym on this budget.

The Rogue adjustable bench 2.0 is the model a personally own and I am very happy with it. This bench can be stored upright, is beefy, and still reasonably easy to move around. The price is also not outrageous even though it comes in higher than REP fitness’s top model AB-5200.

The TITAN Max adjustable FID bench is TITAN’s take on a beefy adjustable bench. If you want something for a low price to rival REP fitness and Rogue TITAN is the right place to shop.

Conclusion for the REP AB-5000 Adjustable Bench

The REP zero-gap bench does what it says on the tin. You can always set it up in a way that there is no gap between the upper and lower pad. This makes it a pain to adjust at times with the pushpin system, but that is the price you pay for this feature to work.