REP fitness AB-5100 bench vs Reflex incline bench

This is a comparison between the Rep Fitness AB-5100 bench and the Reflex incline bench. Follow the links for more details.

Overview and review of the Reflex Olympic incline bench

The Olympic incline bench comes in at $1905 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Most popular Rogue bench

This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020.

These were the most popular rogue benches on Marathon-CrossFit.com in 2020. The rankings were as followed:

The Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the AB2. You can read the full review of the AB3 by following this link.

The Rogue AB2 is the little brother of the AB3. It is the same bench except that it is missing the mechanics to do decline benches. This makes it the best value for money bench from Rogue in my opinion. You can read the full review of the AB2 via this link.

The Rogue west side bench 2.0 is the bench of choice if you weigh more than 120kg and you are a huge fan of the west side method. In my opinion, you can get no bench which is as sturdy at this price point. This bench allows for all the band variations you can dream of and can take a 1000 pound bench press as long as you bolt it to the ground. If you are not a monster, this might be a little overkill. You can read the full review of the Rogue Westside bench 2.0 by following this link.

The Rogue adjustable bench 2.0 is a cheaper design than the AB2 which does the same thing. I personally prefer the pin and lock system of the AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the Rogue adjustable bench 2.0 via this link.

The rogue combo rack could also be listed under racks. I chose to list it under benches because if you buy this instead of a power rack, you buy it for the competition bench and not for the squat stand. Compared to other combo racks in the market the price is decent and you will get a high-quality combo rack. It is not recommended if you are not already an experienced lifter. You can read the full review of the Rogue combo via this link.

Overview of the Reflex Incline bench

The reflex Olympic incline bench press is a good option to provide your athletes or yourself with a safe environment for heavy incline bench presses. Once you hit a 400-pound bench press for repetitions you might not want to do them on a bench on rolls. This incline bench press addresses this need. The reflex Olympic incline weight bench comes with the following specifications:

Combination of 3×3 11ga. & 3/16-walled fully Welded Tubular steel construction.
Powder Coated finish.
Plastic lined weight bar saddles.
Aluminum Spotter Deck.
Adjustable Saddles w/ 11 positions.
Weight storage.
7 position adjustable safeties.
1in high-density foam pad.

This is a beast of machine that will make your big guys smile.

Pros of the Reflex Incline bench

Solid, heavy incline bench with good material. In addition, you will also get a good bit of plate storage which might help with your CrossFit box. If you have a team or if you do incline benching on a regular basis with big weights, this is the station to get.

Cons of the Reflex Incline bench

The reflex incline bench is a single-purpose piece of equipment which takes up quite a bit of floor space. This makes it not ideal for group training settings with changing demands or home gyms unless you are Oprah or the rock.

Alternatives to the Reflex Incline bench

Alternatives to the reflex incline bench are

The reflex decline bench executed the same idea of a fixed bench station with a lot of weight but for a decline bench press set up. This is a good alternative to be secure when it gets very heavy.

The Reflex military bench takes the idea of a big metal station that goes nowhere for the seated military press.

The Rogue AB3 is a portable bench which can be set up as a decline, Incline or flat set up to be used with a regular rack or with dumbbells.

Summary of the Reflex Incline bench

The reflex incline bench press is a good option when you want to ensure the same setup for any incline bench or if you move a lot of weight. As long as you have space it can be an item to aspire to. Especially if you considered the ISO leg press you might want to have a look at the reflex range to make your dollars stretch.

Overview and review of the REP fitness AB-5100 bench

This is an overview of the REP fitness AB-5100 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

REP AB-5100 Adjustable Bench $399

The REP AB-5100 bench is a good option with a push pin design that can also be turned into a decline bench. The only drawback of this design is that this is one of the benches with the widest gap between the two pads from REP fitness. The full specifications of this bench are:

11-gauge steel frame.
1,000 lb capacity.
Seven back pad adjustments & four-seat pad adjustments with laser-cut degree markings on a stainless steel wear guard.
Three large steel supports on the back pad and two on the seat pad for rock-solid stability.
Pivoting urethane grip handle and wheels for easy portability.

Total Height: 17.25"
Total Pad Length: 53.25"
Back Pad Width: 12.25"
Pad Gap: 3"
Overall Footprint: 7.5 SQFT
3% Tolerance

This is a great bench to convert into a decline bench. Otherwise, you might want to opt for the REP AB 5200 or REP AB-5000 instead.

Pros of the REP AB-5100 Adjustable Bench

The pros of the REP AB-5100 are:

Labeled degrees
Big and beefy
Heavy bench
Decline bench (attachment needed)
Pushpin safety
Wheelguards

The design is big sturdy and will meet the needs of big athletes who want to move big weights but do not have space for a dedicated be ch press station. The pushpin mechanism will provide further stability when benching.

The REP AB-5100 can also be turned into a decline bench. For this, you will need to purchase an additional attachment that comes in at slightly under $100. This is a nice upgrade option for anyone who wants to do everything with their bench.

Cons of the REP AB-5100 Adjustable Bench

The cons of the REP AB-5100 adjustable bench are:

Heavy bench
Hard to move
90 degrees
Pushpin adjustments
4-inch GAP

This bench is heavy and can be hard to move sometimes. While this is great when everybody is big and burly and might not be the best portable bench to get in a commercial setting with mainly average-sized humans.

The highest incline is an exact ninety degrees. I always find that to be quite uncomfortable for overhead presses as it easier to lean against a setup that still provides a 5-degree tilt in the highest setting.

The push pin adjustments can be hard to adjust. Compared with the fact that this bench is heavy this can get annoying. I am personally not a huge fan of the pushpin design on any bench as it does not allow for quick and easy adjustments.

The bench has probably the widest gap between the bottom and top pad compared to other be benches out of the REP fitness lineup. This allows for decline settings at the cost of a possible annoyance for flat benching. This is why o prefer the 5200 or 5000 models I am also not an advocate for decline benching.

Alternatives to the REP AB-5100 Adjustable Bench

The alternatives to the REP AB-5100 bench are:

The REP AB-5200 is my personal favorite among the REP fitness benches. It is easy to adjust and move for a beefy bench and can be stored upright. The only drawback is the price.

The REP zero Gap bench is in a similar price range as the 5100 but provides the possibility the adjust the lower pad in a way that there is no gapping. If you really struggle on benches with gaps based on your build then this is the one to get. The downside is the pushpin mechanics. I always hated those and I just would not use benches that are being adjusted this way.

Conclusion for the REP-5100 Adjustable Bench

The REP 5100 adjustable bench is the best model from REP fitness if you are looking for a decline bench option. Otherwise, I would recommend the 5200 or 5000 models if you do not care about the decline.