REP fitness FB-4000 comp lite bench vs Rogue Westside bench 2.0

This is a comparison between the Rep Fitness FB-4000 bench and the Rogue Westside bench 2.0. Follow the links for more details.

Overview and review of the Rogue Westside bench 2.0

The Westside 2.0 comes in at $725 and are a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Most popular Rogue bench

This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020.

These were the most popular rogue benches on Marathon-CrossFit.com in 2020. The rankings were as followed:

The Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the AB2. You can read the full review of the AB3 by following this link.

The Rogue AB2 is the little brother of the AB3. It is the same bench except that it is missing the mechanics to do decline benches. This makes it the best value for money bench from Rogue in my opinion. You can read the full review of the AB2 via this link.

The Rogue west side bench 2.0 is the bench of choice if you weigh more than 120kg and you are a huge fan of the west side method. In my opinion, you can get no bench which is as sturdy at this price point. This bench allows for all the band variations you can dream of and can take a 1000 pound bench press as long as you bolt it to the ground. If you are not a monster, this might be a little overkill. You can read the full review of the Rogue Westside bench 2.0 by following this link.

The Rogue adjustable bench 2.0 is a cheaper design than the AB2 which does the same thing. I personally prefer the pin and lock system of the AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the Rogue adjustable bench 2.0 via this link.

The rogue combo rack could also be listed under racks. I chose to list it under benches because if you buy this instead of a power rack, you buy it for the competition bench and not for the squat stand. Compared to other combo racks in the market the price is decent and you will get a high-quality combo rack. It is not recommended if you are not already an experienced lifter. You can read the full review of the Rogue combo via this link.

Overview of the Westside bench 2.0

The Rogue west side 2.0 is a bolt-together version of the Westside bench to bring down the cost in production and shopping. You will have more moving parts, but it is still a 1000+ pound bench press set up for the serious athletes. One of the main features of this bench is that you can adjust it in 1” increments and use it with bands and chains effectively. If you are a fan of the west side training method and benching big this is a great option. The specifications of the Westside 2.0 bench are:

Made in the USA
2x3" 11-Gauge Uprights with Westside hole spacing
Total Height: 54.625"
Bench Height: 17.5” (adjustable up and down by 1" increments)
1000+LB weight capacity
Your choice of either a 12" wide standard bench pad or a 14.5" wide Thompson Fat Pad™ (at additional cost)
NEW Bolt-Together Design with 0.625" Hardware
NEW 7-Gauge Reinforced Steel Spine Under Pad
NEW Laser-Cut Rogue Side Panels
Infinity J-Cups with UHMW inserts to protect the bar knurl
24" Pin/Pipe Safety Set
4 Adjustable Band Pegs
NEW Optional Spotter Decks (at additional cost)
Color: Black

If you are into the Rogue setup for west side benching, this is the way to go.

Pros of the Westside 2.0

This is a lower-cost version of the west side bench and is probably one of the most cost-efficient setups in the market I which you can comfortably go to 1000 pounds for the bench press.

Cons of the West side 2.0

Compared to other bench stations or combos you will have little to no plate storage and no support for heavy incline or decline bench presses. If you care about a 1000 pound bench press you will probably more than this.

Alternatives to the Westside 2.0

Alternatives to the Westside Bench 2.0

If you care about a west side bench I would conveniently assume that you already own a normal bench press setup or just don’t care about getting a portable bench.

The west side bench is the big brother of the 2.0. You will have fewer moving pieces and bigger beams which brings the cost up but also means that you get more integral stability. If you have the money and do not want to transport the bench often, why compromise?

The reflex incline is an alternative to consider or even an additional purchase to the west side bench 2.0. If you are equipping a gym with a west side bench I know you mean business, so where are your freaks going to do their incline bench presses? Same goes for the decline.

Summary for the Westside 2.0

The west side 2.0 is a great option for the serious athlete who wants to train at home with a buddy. If you are equipping a professional gym you might as well go for the big one.

Overview and review of the REP fitness FB-4000 comp lite bench

This is an overview of the REP fitness FB-4000 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

REP FB-4000 Comp lite bench $115

The FB-4000 is one of the lowest-priced options in the bench department of REP fitness. This bench is a little beefier than the FB-5000 but not compatible with a Thompson fat pad. The full list of specifications is:

Total height: 17"
Total Pad Length: 45.25"
Pad Width: 12"
Total Footprint: 7 SQFT
Designed with Competition Standards
3% Tolerance

If you want a good bench for a low price this is it.

Pros of the FB-4000 Comp lite bench

Pros of the FB 4000 bench are:

Light and easy to move
Low price
Single post design
Grippy cushion

The grippy cushion is one of the best product ideas of REP fitness for their benches. Combine it with a low price and single post design and you get yourself a good recipe for a nice bench for a home gym.

Cons of the FB-4000 Comp lite bench

The cons of the FB-4000 are:

Vertical handle
700lbs limit
Finish
Instability when sitting on it

Vertical handles are not as good as horizontal ones for rolling your bench around. Minor issue, but still worth mentioning and will probably be fixed I future designs.

This bench has a 700-pound limit while others of REP fitness have a 1000 or even 1500 pound limit. If you want a big sturdy bench this is not the one. Even though you could bench 700 on this, I wouldn’t recommend it.

This bench is also designed for bench pressing, not for general use. The single post makes it unstable for exercises like hip thrusts or step-ups.

Alternatives to the FB-4000 Comp lite bench

The Rogue Utility bench and the TITAN hefty bench are good alternatives to the FB-400 if you want a thick pad or a multi-purpose bench.

Conclusion for the FB-4000 Comp lite bench

Good price , solid bench... can not do a lot wrong here.