Information on how to run faster, lift stronger and think deeper

REP fitness PR-1050 rack vs Rogue W4

Posted by Pascal Landshoeft

Jun 11, 2021 9:00:00 AM

REP fitness PR-1050 rack vs Rogue W4

This is a comparison between the Rep Fitness PR-1050 rack and the Rogue W4. Follow the links for more details.

Click for Instagram

Overview and review W4 Garage Gym 

 

The Rogue W4 garage gym rack comes in at $550 and is one of the low-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

Related articles

Overview of the W4

 
The W4 Garage gym was one of the first garage Gym options which Rogue added to their portfolio. You basically get two 108'' uprights with the needed cross member to build a rack against your garage wall. 
 
The W4 Garage Gym comes in black and has to be bolted to the floor and wall. Metal studs or drywall are not recommended for this setup. 
 

Pros of the W4

 
The low price is great and it comes with everything to easily install it against a wall.
 

Cons of the W4

 
You will not be able to park your car in your garage anymore as this installation is fixed. 
 

Alternatives to the W4

 
Alternatives to the W4 are the 
 
The RML 3W and R3 W are two options from Rogue which take the W4 idea to the next level. With these setups, you will still be able to park your car inside the garage.
 

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 
 

Overview of the REP PR-1050 Rack $269

 
 
The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:
 
  • 72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
  • 26" depth inside to inside, 44" wide inside to inside
  • 2x2" steel
  • Plastic lined j-cups to protect bar knurl
  • 2" hole spacing throughout working area
  • 1.25" and 2" Pull up bars
  • Numbered uprights every 5th hole
  • Extra bar holders on the front of safeties, great for pressing outside the rack
  • 2 Weight horns on rear base for storage and added stability
  • 700lb weight capacity
  • 400lb pull up bar capacity
  • 400lb dip attachment capacity (dip attachment available as an optional upgrade)
 
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
 

Pros of the REP PR-1050 Rack

 
The pros of the REP PR-1050 are:
 
  • All in one design
  • Price
  • Short design
 
If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
 

Cons of the REP PR-1050 Rack

 
The cons of the REP PR-1050 are:
 
  • 700lbs capacity limit
  • Limited upgrade options
  • Not ideal for the west side method
  • Imported
 
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.
 

Alternatives to the REP PR-1050 Rack

 
The alternatives to the REP PR-1050 rack are:
 
 
The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
 
The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
 
The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
 

Conclusion for the REP PR-1050 Rack

 
If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.
 
 

Topics: Powerlifting, Rack, Garagegym, Home Gym, Bodybuilding, REP Fitness