Run Faster, Lift stronger, Think deeper

REP fitness SR-4000 squat stand vs Rogue RM8

Written by Pascal Landshoeft | May 30, 2021 4:00:00 PM

REP fitness SR-4000 squat stand vs Rogue RM8

This is a comparison between the Rep Fitness SR-4000 rack and the Rogue RM8. Follow the links for more details.

Overview and review of the Rogue RM8 Power rack

The Rogue RM8 power rack is the new flagship of the rogue rack portfolio for $7.350. It combines the new LT1, Rhino Belt and RM6 into the Rolls Royce of racks.Here are the pros and cons and alternatives to this beast.

If you want the most up to date news or ask direct questions, then you can follow me on Instagram.

Overview of the RM8 

 
The RM8 is the newest edition to the Rogue Monster line up. After publishing the 50cal, Rhino belt squat and a multitude of new bar designs using the Cerakote finish Rogue out it all together and went even bigger. This is the ultimate station to get stronger, especially for anyone who wants to squat heavy up until older age. 
 
As part of the Rogue monster series, you will get the 3x3 Gauge steel with the big bolts. The finish is currently only Cerakote black also I am quite positive that this will change in the foreseeable future. The RM8 has the following dimensions: 
 
  • Length 10’6”
  • Width 6’4”
  • Width Rack inside 43”
  • Height 100.375”
  • Footprint 10’6” x 53”
 
You will basically get an RM6 on steroids with all the plate storage you need and extra functionality to attack your muscles from every angle. Here is the list of items:
 
 
The Rhino belt squat is one of the most interesting new developments in the Rogue portfolio. It is especially good to train heavy for squats without putting too much strain on your lower back. An older lifter will appreciate it, you get lifters will be able to get more volume in. The stand-alone version of the Rhino comes in at roughly $2000 and I have already written about the Rhino belt squat it on my blog. 
 
The loadable weight trolleys are two lever arms with the 50cal mechanism. Again Rogue has shown innovation on these. They revised that the original lever arms were cumbersome to adjust and can up with these. Footballers and Rugby players will appreciate the tackling training which can be done with them. Strongman athletes will have a good piece of equipment to simulate car deadlifts or uneven loads. Bodybuilders will have options to simulate all kinds of rowing and pressing machines when combined with an adjustable bench. Finally, powerlifters can use the setup to create a mini monolift. 
 
The pull-up bar with knurling gives you extra grip. It is one of the newer additions to the rack options of Rogue. Still, it is a bar, not a lot to be said about it. 
 
The custom rogue nameplates look cool, but that is about it. It’s a pity that Rogue does not allow the configuration to be changed to a simple cross member. The nameplate renders the beam almost unusable for any attachments. Still, it looks dang cool. 
 
That plate pins are great as they safe you the extra hassle and cost to provide for plate storage. If you have children in your home I recommend getting spring collars to make the plates safe. Some like to put the plate pins as high as possible. I would not do that as the plates will drop from a height into anything below if they come off the rack. Most children won’t be able to move the spring collars, so at least you have some safety. 
 
The band legs can be used to train with the west side method. You attach bands to the pegs and barbell for added resistance. You can see an example of how that works in the two videos below.  
 

Pros of the RM8 

 
The RM8 is the one-stop-shop for the latest and greatest that Rogue has to offer. The Rhino belt squat will give you many variations to train while keeping your lower back safe. You can switch from resisted jumps to band assisted squats. The potential is limitless. It is really great to see that products can still be made better in a market which you thought was saturated. If you have the money the Banshee won’t disappoint. 
 

Cons of the RM8

 
$7000 is a big price tag for a rack. You can get 7 Fortis racks for this price if you were to equip a commercial gym. Another option would be a monkey rig which gives many more options to run classes of them. This beast is aimed at in e or two people. Of course, you can have more people train at it, but this is definitely the ultimate celebrity or athlete home gym, not the commercial option. Unless you are an NFL team and do not care about multiplying out the 7000 over half the numbers of players you have. 
 
Another con is that for the biggest price tag you get no color option. That is a shame and hopefully changes soon. They probably assemble it by hand and coat it as they don’t have a production line for the RM8 yet. Stay tuned in this space. 
 

Alternatives to the RM8 

 
There are no alternatives if you want all the best toys of Rogue in one rack. But not everyone has 7000 to spend on a rack. Here are some alternatives to spend your hard-earned money on excellent Rogue equipment: 
 
 
If you have the same amount of money to spend but also think about how to make that money back in a professional gym setup the monkey Rig or a monster rig might be a better choice. A Rig leaves you with more options for circuit training and positing people up. You can read more about rigs in my monkey and monster rig articles. 
 
If you want to spend money on a very good rack for your home gym you can go for the RM6 instead. The RM6 comes with different height and color options and leaves you with more choice rather than the take it or leave it approach of the banshee. If you were to come to money at after stage you can still upgrade with the Rhino Drop in and the 50cal trolley arms separately. You can learn about the RM6 in my review. 
 
The RM4 fortis is the best rack option from Rogue under 1.000. If you wanted to equip a commercial gym with seven racks rather than one rolls Royce that is the option to go for. The RM4 is still a great rack and your customers will be happy. 
 
3WC is a rack option which can fold in and be snug against the wall. This way it is an ideal setup for a garage gym when you still want to park your car. It also comes in at around $500. 
 

Summary of the RM8 

 
The RM8 is the best to be had from Rogue. You can use the Rhino when your lower back is at you or do resisted pull-ups while the rest of the rack offers everything for plate storage to a pull-up station. Of course, it is over the top, but that’s the whole point. 
 

Overview and review of the REP fitness SR-4000 squat stand

This is an overview of the REP fitness SR-4000 squat stand including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 
 

Overview of the REP SR-4000 Squat stand $449

 
The REP SR-4000 is REP Fitness’s flagship squat stand. It comes in two height variations and with a stable base similar to a combo rack. Here are some of the specifications from the vendor:
 
  • Two height options to suit your needs ( 96" &103"). 
  • Sturdy 3x3” 11ga steel.
  • Compatibility with most REP 4000 series attachments.
  • 1” spacing throughout the bench press area.
  • Base-mounted weight horns for weight storage and added stability.
  • Long base with pre-drilled feet for optional floor-mounting.
  • 103” height option is great for taller athletes who want to perform kipping movements.
  • Includes Standard PR-4000 J-cups and 1.25” pull-up bar.
  • 5/8” holes on the uprights, 5/8” holes at the rear of the base, 1” holes on the sides of the base.
  • Not compatible with: The REP Belt Squat, Lat/Low Row Attachment.
  • Base dimensions: 73" x 53"
  • Weight: 96": 230lbs, 103": 237lbs
  • Weight Capacity: This is based on the j-cup capacity which is <1500lbs.
 
If you are really into squat stands for the freedom they provide and the money they save then this is good for you. I am personally not a fan, but I will get into the details.
 

Pros of the REP SR-4000 Squat stand

 
The pros of the REP SR-4000 squat stand are:
 
  • Massive built
  • Sturdy uprights
  • Compatibility with some attachments
 
For a squat stand, the REP SR-4000 is massive. This means a lot of security and stability for anyone who is working in it. If you are concerned about the security with a squat stand, this is a good choice.
 
The uprights are sturdy and beefy compared to cheap squat stands and even allow for some of the light PR-4000 attachments to be used. This makes it a more versatile option compared to cheap Amazon squat stands.
 

Cons of the REP SR-4000 Squat stand

 
Cons of the REP SR-4000 squat stand are:
 
  • Footprint
  • Safety
  • Storage
  • Price
 
The biggest con for me is the footprint of this squat stand and other ones of a similar design. If you put two uprights on the footprint of a four-post rack you might as well get a four-post rack. This is nothing against the SR 4000 per se but the design of these particular squat stands with a big base provides more security. You can also get these from other vendors like Rogue and TITAN.
 
While this lulls you in a false sense of security whilst saving you the cost of a four-post rack with similar steel, I think in reality it’s suboptimal. If you are in need of added security as a beginner, spotter arms and a squat stand are a good way to get injured. Many set up their spotter arms wrong, miss them when they fail a rep and the base of this squat stand can actually get in the way when you want to bail a squat. If you don’t know what you are doing, get a proper power rack. If you exactly know what you are doing, this squat stand is overkill.
 
Compared to other, cheaper squat stands without a base, this squat stand can not be easily stored and transported. It is also quite costly if you look at it from a squat stand perspective as you can also get a decent rack for this price.
 

Alternatives to the REP PR-4000 Squat stand

 
 
The REP PR-4100 is in the same price range as the squat stand. If you are torn between the two, definitely go for the PR-4100. It saves space, is more secure to squat in, and provides a better base for attachments, even though you need to remove them to fold the rack.
 
Rogue SML 2 is the closest in build-out of the Rogue portfolio to the SR 4000. If you wanted a very similar squat stand at a higher price thatching not imported thistles a good choice. Also, keep in mind which ecosystem you are entering as Rogue has been around for longer and therefore offers a few more options in their portfolio.
 
The TITAN X3 squat stand is the closest you can get to the SR-4000 in the TITAN Portfolio. If you want to get this show on the road with the lowest budget possible TITAN is a good bet.
 

Conclusion for the REP SR-4000 Squat stand

 
The SR-4000 is well built for its design. There are little to no production issues with it. That is if you buy into the concept of a squat stand with a big base which I just simply don’t. You either need the safety that a power rack provides or you don’t. If you are super advanced like Clarence Kennedy, you might as well get a squat stand that is two separate uprights for easy transportation, storage, and saving cost. Be aware that this necessitates that you are either super strong and won’t fail or know exactly what you are doing when you bail a lift. Spotter arms are in my opinion useless. This is the only piece of safety equipment I ever managed to break with rack pulls. You can get a decent rack for 400 dollars or very basic squat stands for a little more than a hundred. Get one of the two, but not a squat stand that eats up 400 bucks and considerable floor space.
 
View full post