Rogue power pin vs anvil grip

This is a comparison between the Rogue power pin and the anvil grip including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

Overview and review of the Rogue anvil grip

This is an overview of the Rogue anvil grip including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

Related articles

Overview of the Anvil grip

The rogue anvil grip simulates a time old feat of strength. Many attempted to lift an anvil by the horn. The cone shape of the anvil grip simulates this. To increase the weight you can attach it to a loading which Rogue sells separately. The specifications of the anvil grip are:

Made in the USA
Machined from a Solid Piece of Steel
Weight (Unloaded): 12.33 LBS
Length: 11” (Anvil itself), 13.5” (Anvil + Eye Bolt)
Tapered Cone-Shape design: 3” dia. at the base, 0.75” dia. at top
Eye Bolt at the base for attaching weight via loading pin (pin sold separately)
Engraved Rogue branding
Finish Options: Bare Steel or Black Oxide

This is a solid piece of steel to varying your deadlift and grip strength.

Pros of the anvil grip

The pros of the anvil grip are:

Good quality

Simple design

Challenge for the grip

This is a great tool for working on your grip strength. The cone shape gives you a different challenge than the usual bar grippers most people use. A great addition for someone who almost has everything but wants to challenge his or her grip even further.

Cons of the anvil grip

The cons of the anvil grip are:

Needs plates and pin to function
Very specialized equipment
High likelihood to gather dust

While these are a good addition to an existing for someone who is serious about grip strength, for some others this might just be a fun little purchase that is ultimately money down a hole. Be sure you have the plates and you are also investing in a loading pin. Once you are of this mindset you will probably also get the dinnie rings and other grip attachments from Rogue. For someone who is very busy or not dedicated to grip strength this can be a purchase that will lie around in your gym more than you use it.

Alternatives of the anvil grip

Alternatives to the anvil grip are:

For the average Joe, a set of pinch grip and cannonball grip handles are probably the better choices. They are easier to handle with kettlebells or to hang from your rack. Therefore they do not necessarily need a loading pin to function. This gives you more versatility for a little more spend then for the anvil grip.

The dinnie rings are the ultimate hardcore grip strength test from Rogue. If you want to train in the highest levels you will probably get the anvil grip and the dinnie rings. If I had to choose between the two, which I wouldn’t as I am a sucker for complete training sets, I would go for the dinnie rings instead of the anvil grip as it is the cooler record to chase.

Conclusion for the anvil grip

The anvil grip is a must-have for any serious strongman or strength athlete who is serious about their grip. It is cheaper to co nine the anvil grip with a loading pin than to get anvils of different weights. If you want to save money and start out with grip strength training I would recommend going with a combination of pinch blocks and cannonballs first and then graduate to dinnie rings and the anvil at a later point when those get to easy / you have reached your goals on those.

Overview and review of the Rogue power pin

This is an overview of the Rogue power pin including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

Overview of the Rogue power pin

Price: $136.50

The Rogue Power pin is a simple tool for narrow grip deadlifts like the power stairs or duck walks. It is mainly a tool for strongmen training and can also be used to improve your grip in general. It can be loaded up to 500lbs and there is also a ring attachment for it for $50. This is a practical, small tool to especially train weight holds in your home gym or simulate some strongman events. The full specifications are:

Made in America
Diameter: 1.96" loading pin, 4.5" ring
Length: 12" loadable length
Weight:12.5LB, 500+LB weight capacity
10 holes spaced 1” on center for an adjustable height range of 19.75” to 28.75”
Black Powder Coat Finish
Available as Fully Assembled Unit or Just Handle (for use with original Rogue Power Pin)

A small amount of money well spent to put some variety into your deadlift training.

Pros of the Rogue power pin

Pros of the rogue power pin are:

Good price

Simple effective tool

Good finish

With these kinds of tools, it is all about making them easy to use and fit well with the plates. Rogue did a good job on the detail which otherwise can turn something simple into something useless. If you are considering a trap bar a power pin is cheaper and more fun to use.

Cons of the rogue power pin

Cons of the rogue power pin are:

Only loadable to 500lbs
Not versatile

The power pin can only be loaded to 500lb. While this is more than enough for most humans, this is a tool that will also raise interest for the strongest among us. They may want something that can take even more weight. In addition, the only thing you will do with the power pin is to pull something off the floor. For $140 you have other options like jumping ropes or slam balls that can be used in more ways.

Alternatives to the Rogue power pin

Alternatives to the rogue power pin are:

The rogue trap bar would be another way to vary your deadlift and grip training. A trap bar would still enable you to lift the weight with your arms outside the legs. This is usually a better variation for beginners. A trap bar can also be loaded with more weight. Downsides to a trap bar are the bigger price tag and space requirements.

The anvil grip attachment is an interesting twist on deadlifts and holds. You will need a power pin to make it work but it will be worth it. It is shaped like a cone and comes in two different colors, black, and chrome. This is a great tool to collect with other grip strength utensils to let nothing escape your hands.

If you want to get your core more rigid to be able to pick up things from the ground faster and stronger you can also get a decently sized MK D-ball. For the budget of the power pin, you can get a 40lb to 50lb ball. This leaves with more options for carries, slams, ball to shoulders, and similar exercises. The downside is that the ball can not be adjusted for weight and trains your grip less.

The dinnie rings are more an accessory to the power pin rather than an alternative. The dinnie rings in combination with two pins are probably the best way to simulate the famous Scottish stone lift at home and prepare for it.

Conclusion for the Rogue power pin

The rogue power pin is a cost and space-efficient way to mix up your deadlift and grip training if you already have the necessary plates. If you are only starting your grip strength journey you might be better off buying pinch blocks and cannonballs to start as you will not need Kanye’s to make them work.