Run Faster, Lift stronger, Think deeper

REP fitness AB-5200 adjustable bench vs Rogue AB3

Written by Pascal Landshoeft | Jun 6, 2021 4:00:00 PM

REP fitness AB-5200 adjustable bench vs Rogue AB3

This is a comparison between the Rep Fitness AB-5200 bench and the Rogue AB3. Follow the links for more details.

Overview and review of the Rogue AB 3 Adjustable bench 

The Rogue AB3 bench comes in at $935 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

Related articles

 

 

 

Most popular Rogue bench

This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020. 

 
These were the most popular rogue benches on Marathon-CrossFit.com in 2020. The rankings were as followed:
 
 
The Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the AB2. You can read the full review of the AB3 by following this link.
 
The Rogue AB2 is the little brother of the AB3. It is the same bench except that it is missing the mechanics to do decline benches. This makes it the best value for money bench from Rogue in my opinion. You can read the full review of the AB2 via this link.
 
The Rogue west side bench 2.0 is the bench of choice if you weigh more than 120kg and you are a huge fan of the west side method. In my opinion, you can get no bench which is as sturdy at this price point. This bench allows for all the band variations you can dream of and can take a 1000 pound bench press as long as you bolt it to the ground. If you are not a monster, this might be a little overkill. You can read the full review of the Rogue Westside bench 2.0 by following this link.
 
The Rogue adjustable bench 2.0 is a cheaper design than the AB2 which does the same thing. I personally prefer the pin and lock system of the AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the Rogue adjustable bench 2.0 via this link.
 
The rogue combo rack could also be listed under racks. I chose to list it under benches because if you buy this instead of a power rack, you buy it for the competition bench and not for the squat stand. Compared to other combo racks in the market the price is decent and you will get a high-quality combo rack. It is not recommended if you are not already an experienced lifter. You can read the full review of the Rogue combo via this link.
 

 

Overview of the Rogue AB3 Adjustable bench

 
The AB3 Adjustable bench is the next generation bench of the AB2. The AB3 adds decline positions to the setup to make it possible to either bench incline, flat or decline. It made from 11 Gauge steel and is a direct descendent of the Nebula 1080 bench. It also comes on rolls and can be maneuvered around easily. The Rogue AB3 has the following specifications: 
 
  • Adapted from the Nebula 1080 "Awesome" Utility Bench
  • Includes NEW Decline Bench feature
  • 6 Adjustable Seat Settings
  • 9 Adjustable Back Pad Settings
  • Weight: 117LB
  • Length (with bench flat): 68"
  • Pad Width: 12"
  • Height: 18"
  • Steel: 2x2" and 2x3" 11-Gauge Steel
Which makes it the most versatile one in the Rogue line up.
 
 

Pros of the Rogue AB3 Adjustable bench

 
The AB3 is the most versatile bench out of the Rogue line up. You can use it on the entire gym floor and give it the most possible setups to bench press. 
 

Cons of the Rogue AB3 Adjustable bench

 
For a portable bench, the AB3 comes in at a high price. The attachment which makes it possible to decline bench might also not be for everyone. Especially powerlifters and big athletes might feel like that this addition to the bench is more of a hindrance than a value add. 
 

Alternatives to the Rogue AB3 Adjustable Bench

 
Alternatives to the Rogue AB 3 bench are
 
 
The AB2 is the bench as the AB3 just without the option to do decline bench presses. If you want a big bench that can be moved and don’t trust decline setups on portable benches this is the one for you. 
 
The Rogue Westside 2.0 bench is a drop in for Rogue racks specialized for the Westside style training. It will provide a flat bench setup which can be effectively used with bands and chains to create a maximum variation on the flat bench press. 
 
The Rogue Adjustable bench is the best value for money bench you can get from Rogue. They spent time and thought on perfecting the production process to make this their low-cost adjustable bench.
 

Summary for the AB3 Adjustable bench

 
The Roge AB3 is the Porsche in the Rogue portfolio when it comes to portable benches. As long as you don't mind the attachment at the end of the bench getting in your way.

Overview and review of the REP fitness AB-5200 adjustable bench

This is an overview of the REP fitness AB-5200 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

Related articles

REP AB-5200 Adjustable Bench $469

 
The REP AB-5200 is the current top dog among the REP fitness benches. It is easy to adjust, has a minimal gap between the lower and higher pad, and can be easily rolled around with it included pair of rolls. The full specifications of this bench are:
 
  • This product was designed by REP in the USA and is a Patent Pending Product.
  • 11-7 gauge steel throughout 2x3" steel frame with a 1,000 lb capacity.
  • 7 back pad adjustments with laser-cut degree markings in 0, 15, 30, 45, 60, 75, and 85 degrees.
  • 3 seat pad adjustments to find the perfect angle.
  • High-grip pad material with an ultra-dense foam core, backed by 3/4" plywood.
  • Ladder back design with cage. Nylon cover over bolts to protect the paint on the ladders.
  • Urethane-covered back pad handles.
  • Oversize stainless-steel handle and wheels with a low lift-off point for easy maneuverability.
  • Thick steel wheel guards to protect the wheels when being maneuvered, and to lessen tripping hazard.
  • Space-saving design allows the bench to be stored in an upright position.
  • Stainless logo plates.
  • Optional Spotter Deck sold separately.
 
  • Total Height: 18"
  • Total Pad Length: 55.25"
  • Back Pad Width: 12"
  • Pad Gap: 2.25"
  • Toal Footpring: 8.25 SQFT
  • Weight: 125lbs
  • 3% Tolerance
 
You can not go wrong with this bench except for the price. This the most expensive bench from REP and you might opt for something else to push your savings further. Compared to the competition from Rogue Fitness you are saving a lot as you are still staying under $500 where the top range of Rogue fitness products can take you close to $1000.
 

Pros of the REP AB-5200 Adjustable Bench

 
The pros of the REP AB-5200 are:
 
  • Easy-adjust
  • Good outside rack bench
  • Horizontal handle
  • Easier to move
  • Can be stored upright
  • 85-degree incline
  • Spotter deck option
  • Less likely to catch fingers
  • Labeled degrees
  • Color options
 
The big pro of this bench is that it is easy to use and transport even though it is beefy. The horizontal handle at the base of the bench makes it easy to lock up and roll around. This makes it great outside the rack bench for all purposes on a free-weight area.
 
The incline options run up to 85 degrees and it can also be stored upright when in the flat position. This makes it easy to put this bench against a wall when it is not being used to free up some space. I personally also like that the highest option is not a true 90-degree angle as this is easier to train in while putting less strain on your shoulders.
 
REP Fitness also has three extra features on this bench compared to Its main competitor Ro hue Fitness. The mechanics for putting the bench up and down are protected by a little rail. This makes a lot less likely to catch your fingers in them. The angles for the different inclines are numbered so that you always know which degree you are training on. The last bonus is that REP Fitness offers different color options for its benches where Rogue only comes in black.
 

Cons of the REP AB-5200 Adjustable Bench

 
The cons of the REP AB-5200 are
 
  • Gap in seat
  • Light compared to bigger benches
  • Price
  • Short seat
 
The seat has a gap and the lower part is always quite short. If you have a very big backside or it happens to fall on the gap in your bench press setup then you might want to go for the REP zero-gap bench instead.
 
Compared to other bigger benches from competitors this bench is fairly light. Within the REP range, it is the beefiest you can get, but other vendors offer some bigger benches specifically for powerlifters. This is only a consideration if you intend to be ch press more than 700 lbs on a regular basis on your bench. For all other scenarios, I personally think that the AB-5200 is more than enough.
 
The last thing is that this is the most expensive bench from REP Fitness you can get. That is nOt the definition of the ultimate bargain, even though REP fitness will already save you a lot of money competed to Rogue fitness.
 

Alternatives to the REP AB-5200 Adjustable Bench

 
Alternatives to the REP AB-5200 are:
 
 
The REP zero Gap bench is a good alternative if you think you need a longer lower seat and no gap in the bench pad. The Zero gap also works with a push pin setup for the different incline settings which makes it more secure once it clicks in. The downside is that it can be a pain to adjust mid-session.
 
The Rogue AB2 adjustable bench works with a push pin mechanic and comes very close to the REP fitness Zero gap bench design. If you want your bench from the best vendor around and like the push pin design, this is it. I personally think that this bench is a little pricey even for Rogue standards.
 
The Rogue adjustable bench 2.0 is the closest design from Rogue to the REP AB-5200. I own this bench myself and if you have any worries about a gap I can assure you that it is virtually nonexistent for the Adjustable bench 2.0. Price-wise it is close enough to the AB-5200 to consider it if the rest of your gym is also from Rogue.
 
The TITAN max adjustable FID bench is TITAN’s approach to a beefy adjustable bench. Titan Fitness is the low-cost competitor in the home gym space to REP fitness and Rogue fitness. They are known to have more quality issues on minor things like the coating and welds but make up for it with dumping prices.
 

Conclusion for the REP AB-5200 Adjustable Bench

 
The REP AB-5200 is an excellent bench for the price tag and will be beefy enough for all your needs in a home or commercial gym. You can not do a lot wrong here unless you are super worried about the gap in a bench, which this model has a minimal one of. The best alternative would be the Rogue adjustable bench 2.0 it a slightly higher price.
View full post