REP fitness AB-5100 bench vs Rogue AB2

This is a comparison between the Rep Fitness AB-5100 bench and the Rogue AB2. Follow the links for more details.

Overview and review of the Ab2 Adjustable bench

The AB-2 bench comes in at $815 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

Related articles

Most popular Rogue bench

This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020.

These were the most popular rogue benches on Marathon-CrossFit.com in 2020. The rankings were as followed:

The Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the AB2. You can read the full review of the AB3 by following this link.

The Rogue AB2 is the little brother of the AB3. It is the same bench except that it is missing the mechanics to do decline benches. This makes it the best value for money bench from Rogue in my opinion. You can read the full review of the AB2 via this link.

The Rogue west side bench 2.0 is the bench of choice if you weigh more than 120kg and you are a huge fan of the west side method. In my opinion, you can get no bench which is as sturdy at this price point. This bench allows for all the band variations you can dream of and can take a 1000 pound bench press as long as you bolt it to the ground. If you are not a monster, this might be a little overkill. You can read the full review of the Rogue Westside bench 2.0 by following this link.

The Rogue adjustable bench 2.0 is a cheaper design than the AB2 which does the same thing. I personally prefer the pin and lock system of the AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the Rogue adjustable bench 2.0 via this link.

The rogue combo rack could also be listed under racks. I chose to list it under benches because if you buy this instead of a power rack, you buy it for the competition bench and not for the squat stand. Compared to other combo racks in the market the price is decent and you will get a high-quality combo rack. It is not recommended if you are not already an experienced lifter. You can read the full review of the Rogue combo via this link.

Overview of the AB2 Adjustable bench

The Rogue AB2 bench comes from the designers of the Nebula 1080 bench which has been on an established reference in the fitness industry. The Ab2 includes 6 different seat settings and nine back positions. This makes it a strong piece of equipment for any home gym which needs versatility and space-efficient setup. The specifications of the Rogue AB2 bench are:

Adapted from the Nebula 1080 "Awesome" Utility Bench
Weight: 94LB
Length: 52"
Pad Width: 12"
Height: 18"
Footprint: 51 1/4" x 22 1/2"
Steel: 2 x 2" and 3 x 3" 11-Gauge Steel
6 Adjustable Seat Settings
9 Adjustable Back Pad Settings (from flat bench to 78 degrees upright)

This is the upmarket version from Rogue if you do not want to do decline bench presses.

Pros of the AB2 Adjustable bench

The AB2 has a pin design which keeps the bench firmly in place. It is heavy duty and well made and gives you more options than the cheaper versions from Rogue.

Cons of the AB2 Adjustable bench

$815 can still be a hefty price tag for a bench. As you are not buying any kind of structure with this and probably did not consider yourself that much of a beast to look into the Reflex options, you might as well want to save a little more on the bench itself. This bench has the price of a rack.

Alternatives to the AB2 Adjustable bench

Alternatives to the AB2 are

The AB3 is the weapon of choice if you need a bench that can be moved around and used for incline, decline, and flat bench press setups. It comes in at a slightly higher price tag than the AB2 and makes more sense in my opinion if you are looking for a high-end bench.

The Rogue Adjustable bench 2.0 would probably my personal choice for a bench from Rogue. This is the middle priced bench which covers any need you might have. Production costs are lower compared to the AB2 as not as many holes need to be drilled. It still does the same with fewer options to adjust the bench. To be honest, in practice you will most likely only use one incline, one decline, and the flat position anyway.

The Rogue Flat utility bench would be my tool of choice if I had to equip an entire gym with Rogue benches. They have multiple options for customization and are only a fraction of the cost f the AB2 and AB3. You basically get 4 of these four one AB2.

Overview and review of the REP fitness AB-5100 bench

This is an overview of the REP fitness AB-5100 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

REP AB-5100 Adjustable Bench $399

The REP AB-5100 bench is a good option with a push pin design that can also be turned into a decline bench. The only drawback of this design is that this is one of the benches with the widest gap between the two pads from REP fitness. The full specifications of this bench are:

11-gauge steel frame.
1,000 lb capacity.
Seven back pad adjustments & four-seat pad adjustments with laser-cut degree markings on a stainless steel wear guard.
Three large steel supports on the back pad and two on the seat pad for rock-solid stability.
Pivoting urethane grip handle and wheels for easy portability.

Total Height: 17.25"
Total Pad Length: 53.25"
Back Pad Width: 12.25"
Pad Gap: 3"
Overall Footprint: 7.5 SQFT
3% Tolerance

This is a great bench to convert into a decline bench. Otherwise, you might want to opt for the REP AB 5200 or REP AB-5000 instead.

Pros of the REP AB-5100 Adjustable Bench

The pros of the REP AB-5100 are:

Labeled degrees
Big and beefy
Heavy bench
Decline bench (attachment needed)
Pushpin safety
Wheelguards

The design is big sturdy and will meet the needs of big athletes who want to move big weights but do not have space for a dedicated be ch press station. The pushpin mechanism will provide further stability when benching.

The REP AB-5100 can also be turned into a decline bench. For this, you will need to purchase an additional attachment that comes in at slightly under $100. This is a nice upgrade option for anyone who wants to do everything with their bench.

Cons of the REP AB-5100 Adjustable Bench

The cons of the REP AB-5100 adjustable bench are:

Heavy bench
Hard to move
90 degrees
Pushpin adjustments
4-inch GAP

This bench is heavy and can be hard to move sometimes. While this is great when everybody is big and burly and might not be the best portable bench to get in a commercial setting with mainly average-sized humans.

The highest incline is an exact ninety degrees. I always find that to be quite uncomfortable for overhead presses as it easier to lean against a setup that still provides a 5-degree tilt in the highest setting.

The push pin adjustments can be hard to adjust. Compared with the fact that this bench is heavy this can get annoying. I am personally not a huge fan of the pushpin design on any bench as it does not allow for quick and easy adjustments.

The bench has probably the widest gap between the bottom and top pad compared to other be benches out of the REP fitness lineup. This allows for decline settings at the cost of a possible annoyance for flat benching. This is why o prefer the 5200 or 5000 models I am also not an advocate for decline benching.

Alternatives to the REP AB-5100 Adjustable Bench

The alternatives to the REP AB-5100 bench are:

The REP AB-5200 is my personal favorite among the REP fitness benches. It is easy to adjust and move for a beefy bench and can be stored upright. The only drawback is the price.

The REP zero Gap bench is in a similar price range as the 5100 but provides the possibility the adjust the lower pad in a way that there is no gapping. If you really struggle on benches with gaps based on your build then this is the one to get. The downside is the pushpin mechanics. I always hated those and I just would not use benches that are being adjusted this way.

Conclusion for the REP-5100 Adjustable Bench

The REP 5100 adjustable bench is the best model from REP fitness if you are looking for a decline bench option. Otherwise, I would recommend the 5200 or 5000 models if you do not care about the decline.